Citizen Systems CLP-6401 user manual Important Safety Instructions

Page 4

Important Safety Instructions

1.Read all of these instructions and save them for later reference.

2.Follow all warnings and instructions marked on the product.

3.Unplug this product from the wall outlet before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning.

4.Do not use this product near water.

5.Do not place this product on an unstable cart, stand or table. The product may fall, causing serious damage to the product.

6.Slots and openings on the cabinet and the back or bottom are provided for ventilation.

To ensure reliable operation of the product and to protect it from overheating, do not block or cover these openings. The openings should never be blocked by placing the product on a bed, sofa, rug or other similar surface. This product should never be placed near or over a radiator or heat register. This product should not be placed in a built-in installation unless proper ventilation is provided.

7.This product should be operated from the type of power source indicated on the marking label. If you are not sure of the type of power available, consult your dealer or local power company.

8.This product is equipped with a three-pronged plug, a plug having a third (grounding) pin. This plug will only fit into a grounding-type power outlet. This is a safety feature. If you are unable to insert the plug into the outlet, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the grounding-type plug.

9.Do not allow anything to rest on the power cord. Do not locate this product where the cord will be walked on.

10.If an extension cord is used with this product, make sure that the total of the ampere ratings on the products plugged into the extension cord do not exceed the extension cord ampere rating. Also, make sure that the total of all products plugged into the wall outlet does not exceed 15 amperes for 120V outlet and 7.5 amperes for 220-240V outlet.

11.Never push objects of any kind into this product through cabinet slots as they may touch dangerous voltage points or short out parts that could result in a risk of fire or electric shock. Never spill liquid of any kind on the product.

12. Except as explained elsewhere in this manual, don't attempt to service this product yourself. Opening and removing those covers that are marked "Do Not Remove" may expose you to dangerous voltage points or other risks. Refer all servicing on those compartments to service personnel.

13.The mains plug on this equipment must be used to disconnect mains power. Please ensure that the socket outlet is installed near the equipment and shall be easily accessible.

14.Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions:

A.When the power cord or plug is damaged or frayed.

B.If liquid has been spilled into the product.

C.If the product has been exposed to rain or water.

D.If the product does not operate normally when the operating instructions are followed. Adjust only those controls that are covered by the operating instructions since improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to normal operation.

E.If the product has been dropped or the cabinet has been damaged.

F.If the product exhibits a distinct change in performance, indicating a need for service.

-iii -

Image 4
Contents CLP-6401 FCC Compliance Statement For American Users EMI Compliance Statement For Canadian Users Important Safety Instructions Page Safety Signs Page General Precautions Precautions When Installing the Printer Chapters in This Manual Chapter Control PanelTable of Contents Chapter Troubleshooting Xii Chapter Setup Confirmation of Carton Contents Part Names and Functions Front ViewInside View Page Side View Connection to Power Connection to a Computer Chapter Control Panel Control Panel LCD/LED Indications and Adjustment Controls Normal Operating ModePrinter Setup Mode Self-Test ModePage System Maintenance Mode Page Printer Default Values Preparation for Printing Specification of Label and Tag Kinds of PaperPrinting area Units for position and length Reference line and points Paper Setting Roll paper Ribbon Ribbon Setting Head Offset Adjustments Heating element Head Pressure Adjustments Ribbon Tension Adjustments Ribbon width Ribbon winding Ribbon feed Tension SectionAdjustable Sensor Exterior view and part namesHow to operate adjustable sensor Specification of paper for adjustable sensor Cleaning Troubleshooting Error Messages Error descriptions and indicationsCmnd Error indications and corrective actions Page Page Power Troubleshooting Paper Feed Troubleshooting Ribbon Feed Troubleshooting Print Troubleshooting Page Interface Troubleshooting Page Chapter Options Auto-Cutter Unit Peeler UnitPcmcia Memory Card Page Chapter Specifications Main Specifications ・ UCC/EANDescription LCD Description System configuration InterfaceSpecification of interface Serial interface3 RS-232C loopback test Fig. Loopback test4 RS-232C protocol Fig. Buffer in usePage Interface pin assignment Parallel interface pin assignment table Outline of Command System Without printExample of Connection to a Computer Tear-Off Function Tear-off when printingTurning Tear ON/OFF Tear-off when feeding ・ Paper is fed to the cut positionCut position adjustments Tear-off and type of dataWhen fnnn command is executed while Tear is OFF Priority order