During execution of the printer
The status page will look similar to the following:
The Status Label gives the user information regarding the current system setting of the printer. It references the Version #, shows the date and time setting, validates the on board ROM, indicates current serial communication values, Mode of printing (Direct Thermal or Thermal Transfer), the type of media (Gap, Black Line) with sensor voltage values, checks the head and even tells you the number of mm’s of material that have passed under the head mechanism. All of this information can be useful when trying to troubleshoot your printer.
When the printer enters Monitor mode, any information communicated to the printer will be printed on the label material. After each carriage return a label will be printed displaying in Hex and ASCII the contents of the data stream received at the printer. You can use this to test both the actual fact of communication with the printer, and the exact contents of the data stream being sent.
To return the printer to normal operating cycle the power.