Citizen Systems iDP-460 user manual 200,40ch, 250,42ch

iDP-460 User’s Manual

FS	P-200,40ch
[Name]	Execute P-250 Mode
[Code]	<1C>H
[Function]	This command resets all the attributes, clears the print buffer, and set the
	right margin to 42. A subsequent command and printer operation will be of the
	P-250 mode.
[Caution]	If this command is received halfway printing, the data and attributes so far
	will be deleted. If this command is set in the P-250 mode, it will be ignored.
[Initial Value]	The P-200 mode is effectuated immediately after power-on.
[See Also]	GS

GS	P-250,42ch
[Name]	Execute P-200 Mode
[Code]	<1D>H
[Function]	This command resets all the attributes, clears the print buffer, and set the
	right margin to 40. A subsequent command and printer operation will be of the
	P-200 mode.
[Caution]	If this command is received halfway printing, the data and attributes so far
	will be deleted. If this command is set in the P-200 mode, it will be ignored.
[Initial Value]	The P-200 mode is effectuated immediately after power-on.
[See Also]	FS

48 CITIZEN