Citizen Systems iDP-460 user manual ESC d 250, P-900R, ESC e n 250, P-900R

					iDP-460 User’s Manual
ESC d						P-250, P-900R
[Name]	Request Printer Status
[Code]	<1B>H<64>H
[Function]	In the P-250 mode and P-900R mode, this command sends the following 1-byte
	status messages shown below. This command is valid only for the serial
	interface.
	Bit	Code	Function		Value
				0		1
	0	L	Paper end	With paper		Without paper
	1	X	Not defined
	2	X	Not defined
	3	X	Not defined
	4	X	Not defined
	5	1	Unused	- -		Fixed at 1
	6	F	Mechanical error	Without error		With error
	7	P	Parity	Fixed at 0		- -
[Caution]	This command is ignored for the parallel interface and in the P-200 mode. If
	the paper runs out or there is a mechanical error, the data may not be
	received.
[See Also]	ESC a
ESC e (n) ;						P-250, P-900R
[Name]	Set Right Margin
[Code]	<1B>H<65H>(n)<3B>H
[Domain]	0 ≤ (n) ≤42 (<30>H ≤ n ≤<39>H)
[Function]	In the P-250 mode and P-900R mode, this command controls whether the
	characters should be printed or at which position of the line they should be

printed, when the buffer is full. When the parameter is set between 1 and 41, the printer will print automatically when the n-th printable character is received. If the parameter is set beyond these limits, printing will be performed when the LF command is received.

53 CITIZEN