Citizen Systems iDP-460 user manual ESC b n, ESC c

iDP-460 User’s Manual

[Sample Program] When setting the line height to n = 20(1/3 inch) ESC a 20 ; → LPRINT CHR$(&H1B)+”a20;”; <1B>H<61>H<32>H<30>H<3B>H

ESC b (n) ;	ALL
[Name]	Eject Paper by n-lines
[Code]	<1B>H<62H>(n)<3B>H
[Domain]	1 ≤ (n) ≤ 255 (<30>H ≤ n ≤ <39>H)
[Function]	This command ejects the paper by n-lines at the specified line height.
[Caution]	Be sure to add ";"(<3B>H) to the end of the parameter. If 0 or 256 or more is
	specified for the parameter, this command will be ignored.
[See Also]	ESC a

[Program Example] When ejecting the paper by 5 lines

ESC b 5 ; → LPRINT CHR$(&H1B)+”b5;”; <1B>H<62>H<35>H<3B>H

ESC c	ALL
[Name]	Initialize
[Code]	<1B>H<63>H
[Function]	This command clears all the attributes, settings, and modes to initialize(turns
	on/off the power software-wise).
[Caution]	The data in the input buffer is not cleared.
[See Also]	ESC a

52 CITIZEN