Citizen Systems iDP-460 user manual Details

iDP-460 User’s Manual

10-3-2 Details
LF	ALL
[Name]	Feed Paper
[Code]	<0A>H
[Function]	This command prints the data in the print buffer and feeds the paper by one
	line. If printing is completed, the command will shifts a printing position to
	the left margin and clear the print buffer. This is a standard command for
	printing one text line.
[Caution]	In other than the P-250 mode and P-900R mode, this command is ignored
	immediately after one-line buffer-full printing. In the P-250 mode and
	P-900R mode, printing is not performed until this command is received.
[See Also]	ESC a, ESC b

FF	ALL
[Name]	Eject Paper
[Code]	<0C>H
[Function]	This command prints the data in the print buffer and ejects the paper by one
	inch, regardless of the current setting of line height. This command allows
	you to view the last line of the text and leaves an adequate margin in order to
	cut the paper.
[See Also]	ESC a

46 CITIZEN