5. 5 | Part Descriptions |
|
(1) | Power Cord | Attach the connector end to the printer inlet, and insert the plug end into an electric |
|
| outlet. |
(2) | Inlet | This is the electric power inlet. Attach the connector end of the power cord here. |
(3 ) | Power Switch | Power is supplied to the printer by turning this switch on. |
(4) | Line Switch | When this switch is pressed, the printer enters select (on line) status. When pressed |
|
| again, the printer enters deselect (off line) status. This switch is also used when |
|
| clearing an alarm condition. |
(5) | LF Switch | Paper feeding is performed when this switch is pressed (in deselect status only). |
|
| This is used when inserting the paper and for spacing up etc. |
(6) | Power Lamp | This lights up when the power switch is "on" and goes out when turned "off". |
(7) | On Line Lamp | This lights up when the printer is in select (on line) status, and goes out when in |
|
| deselect (off line) status. Printing operation is performed only when this lamp is on. |
(8) | Alarm Lamp | This lights up when printer operation is abnormal. When in an alarm condition, |
|
| printing and line feed operations are not performed. |
(9) | Interface Connector | Connects through a cable to a computer etc. Please be certain that power to both |
|
| the printer and the computer are turned off when connection is made. |
(l0) | Connector Cover | Covers the connector which is used for the paper winder mechanism |
(l1) | Paper Cover | Opens when replacing the paper roll. |
(l2) | Ribbon Cover | Opens when replacing the ribbon. |
(l3) | Top Case |
|
(l4) | Bottom Plate |
|
(l5) | Printer Cover |
|
(l6) |
| |
(l7) | Bottom Base |
|
(l8) | Base Stoppers |
|
11 | CITIZEN |