Corinex Global GameNet manual Functional Description

Page 9

Installation

LED Definitions

LEDs from top to bottom)

1. VPI

Displays the quality of the powerline link when the adapter is synchronized with another adapter on the same network.

2. ETH

Displays the presence of an Ethernet link and activity on the link.

Blinking: receiving/transmitting data

Connector Definitions (Connectors from left to right)

1.LAN: 1x RJ-45 LAN10/100 Ethernet port

7

2.4Functional Description

2.4.1 Standby Button

By default, when plugged in, the adapter is in the ON state. When Standby operation is desired, the button should be pressed and released at once. This will set the adapter in energy-saving Standby operation mode. When the adapter is in Standby operation, the button can be pressed to set the adapter back into the ON mode.

2.4.2 SYNC/ RST Buttton

2.4.2.1 One-button Security Setup (OBUS)

By default, powerline adapters come without a network identifier and without an encryption key. As a result, when they are plugged in, a new Powerline network will be created (referred to as a public network).

Corinex GameNet

Image 9

Contents Manual Corinex AV200 Powerline Ethernet Wall Mount F Corinex GameNet CopyrightCorinex Communications Corporation End User License AgreementRegistration and Warranty Contents Introduction Enables peripheral- and printer sharingOverview About this ManualPackage Contents InstallationSystem Requirements Physical DescriptionFunctional Description Factory Reset ETH LED LED Definitions VPI LEDConnecting the Wall Mount Adapter Technical SpecificationsInterface EMC limitsAdapter Configuration PasswordAdapter Configuration Main System Information Additional InformationPHY Status Priority Status Overview Change ConfigurationBasic Settings MAC Configuration Advanced ConfigurationWith each other Types and their Network Identifiers Network Id Home PHY Configuration Adapter Configuration Network ConfigurationMulticast Configuration Priority Configuration Adapter Configuration Vlan ConfigurationAdapter Configuration Trigger Hardware Reset Security ConfigurationAdapter Configuration Flash Upgrade Firmware upgrade using a Tftp ServerOpen TFTPD32 Corinex GameNet Internet Configuring Video ApplicationsPattern 1 and Class Priority Firmware UpdateVideo Network Setups Video Network SetupsIntroduction Network ScenariosSingle-Network Scenarios Internet Multi-Network ScenariosTwo Networks on the Same Circuit Two Networks on Different CircuitsNetwork Configuration Setting an IP Address on your ComputerSetting Up a Static IP in Windows XP Corinex GameNet Setting up a static IP in Windows Network Configuration Setting Up a Static IP in Linux Network Configuration Setting up a static IP in Mac OS Network Configuration Improving Network Performance Checking Network Performance Using Powerline FiltersPowerline Domain Troubleshooting Guide Wall Mount adapters