Corinex Global GameNet manual Adapter Configuration, Password

Page 13

Adapter Configuration

3Adapter Configuration

In order to access the web-based configuration pages, it is necessary to know the adapter’s IP address and for your computer to be connected to the wall mount adapter (as described in section 2.5). Corinex adapters come with a default IP address 10.10.1.69.

Open a web browser (Microsoft Internet Explorer v6.0, Mozilla v1.7.2 and Mozilla Firefox v1.0 have been verified for use with these products.), and type the IP address in the address bar – the URL should be http://10.10.1.69/ unless you have already changed it to something else.

Changing the default IP address is required, so that two or more devices can be on the same network. The IP address is a device’s unique identifier on a network, so the adapters would not be able to tell each other apart if they had the same identity, just as a postman wouldn’t know which house to deliver to, if two neighbors in a large city had the same street number. Follow the steps below to configure a new IP address for each adapter:

1.In your computer’s network settings, enter an address in the range 10.10. X.X (e.g. 10.10.1.2) and set the netmask to 255.255.0.0. This is necessary in

order to be compatible with the adapter’s default settings. For details on how

11

to set up an IP address on your computer, please see chapter 5.

 

2.Plug in your Corinex AV200 Powerline Ethernet Wall Mount Adapter F and connect it to the PC via the supplied Ethernet cable.

3.Open your web browser and type http://10.10.1.69. You will then be able to configure the settings for your wall mount adapter.

3.1Password Page

If the password is enabled, you’ll need to login before you can access the configuration pages. Therefore, you will first be taken to the Authentication page for login. If the configuration page is left idle for 5 minutes, the login expires and you will need to login again.

Note: The default password is “paterna”.

Corinex GameNet

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Manual Corinex AV200 Powerline Ethernet Wall Mount F Corinex GameNet CopyrightCorinex Communications Corporation End User License AgreementRegistration and Warranty Contents Introduction Enables peripheral- and printer sharingOverview About this ManualPackage Contents InstallationSystem Requirements Physical DescriptionFunctional Description Factory Reset ETH LED LED Definitions VPI LEDConnecting the Wall Mount Adapter Technical SpecificationsInterface EMC limitsPassword Adapter ConfigurationAdapter Configuration Main System Information Additional InformationPHY Status Priority Status Overview Change ConfigurationBasic Settings MAC Configuration Advanced ConfigurationWith each other Types and their Network Identifiers Network Id Home PHY Configuration Adapter Configuration Network ConfigurationMulticast Configuration Priority Configuration Adapter Configuration Vlan ConfigurationAdapter Configuration Trigger Hardware Reset Security ConfigurationFirmware upgrade using a Tftp Server Adapter Configuration Flash UpgradeOpen TFTPD32 Corinex GameNet Internet Configuring Video ApplicationsPattern 1 and Class Priority Firmware UpdateVideo Network Setups Video Network SetupsIntroduction Network ScenariosSingle-Network Scenarios Internet Multi-Network ScenariosTwo Networks on the Same Circuit Two Networks on Different CircuitsSetting an IP Address on your Computer Network ConfigurationSetting Up a Static IP in Windows XP Corinex GameNet Setting up a static IP in Windows Network Configuration Setting Up a Static IP in Linux Network Configuration Setting up a static IP in Mac OS Network Configuration Improving Network Performance Checking Network Performance Using Powerline FiltersPowerline Domain Troubleshooting Guide Wall Mount adapters
Top Page Image Contents