DFI 40800950 manual On Disable, Default, System’s Beep Message Output Select Jumper JP8

Hardware Installation

1 2 31 2 3

1-2 On: Disable		2-3 On: Enable
	(default)

2.6 Jumper Settings for the System’s Beep Message

System’s Beep Message Output Select - Jumper JP8

2

This jumper is used to select the speaker from which the system’s beep message will sound. If you want the system’s beep message to come from the external speaker that is connected to the line-out jack, set this jumper pins 1 and 2 to On. If you want the system’s beep message to come from the PC’s speaker, set this jumper pins 2 and 3 to On.

1

2

3

1

2

3

1-2 On:	2-3 On:
External speaker	PC’s speaker
	(default)

23