Hand Held Products Dolphin 7400, Dolphin 7450 manual Communicating with the Dolphin Terminal

Page 64

ActiveSync Connection Settings

To configure the Dolphin 7400/7450 terminal for communications, see the previous section on Configuring the Dolphin Terminal.

Communicating with the Dolphin Terminal

To communicate with the Dolphin and any other devices connected to the Dolphin Charging/Communication cradle:

1.Insert the Dolphin into the terminal well of the HomeBase/IntelliBase/USB HomeBase. If the Dolphin is in sleep mode, it will awaken into active state.

2.The DOCK LED on the cradle will illuminate. If the Dolphin does not turn on, or the LED does not light up, make sure that it is properly seated in the terminal well and that the power supply is properly connected to the cradle and plugged into a functioning AC outlet.

3.Start your application on the Dolphin terminal or the host computer. Data can then begin transmitting between the terminal and the devices connected to the Dolphin cradle.

When data transfer begins, the COMM LED on the cradle will blink red and green. If the HomeBase/IntelliBase/HomeBase will not communicate with the Dolphin, check the port connections to ensure that the cradle is correctly configured.

6 - 14

Image 64

Contents Dolphin 7400/7450 Hand Held Computer Trademarks PatentsDisclaimer Table of Contents Using the Dolphin 7400/7450 Dolphin QuadCharger 11-2 Additional Features IntroductionRequired Safety Labels Batch TerminalsIf Your Dolphin 7400/7450 has a Radio Dolphin 7400/7450 RF Terminal with Cisco FCC Compliance Dolphin 7400/7450 Batch TerminalCanadian Compliance Regulatory and Safety Agency Approvals Parameter SpecificationDolphin 7400/7450 RF Cisco 352 R&TTE Compliance Statement TTEBatteries Care and Cleaning of the DolphinMicrowaves Page Getting Started Accessories for the Dolphin 7400/7450Dolphin 7400 Models and Options Bar Code Symbologies Supported Laser Engine Options and Symbologies SupportedUsing Dolphin 7400/7450 for the First Time Unpack the Carton and Check Its ContentsCharging the Main Battery and Backup Battery Removing the Battery PackInstalling the Battery Pack Turning the Dolphin On And Off For the First TimeWaking the Dolphin From Sleep Mode Do not Press ANY Keys While the Terminal is Booting UPStylus Properties Screen Setting the Date/Time Installing DetectoidPC Setting Up Communications with DetectoidUsing DetectoidPC and DetectoidCE Page DetectoidCE Verifying that Dolphin 7400/7450 is Working Properly Configuring the ModemTouchscreen-equipped terminals Resetting the Dolphin Warm Boot Resetting the Dolphin Cold BootTerminals without touchscreens Page System Features Dolphin 7400/7450 OverviewLEDs Front Panel FeaturesVGA Display Audio Signals ON/SCAN KeyCursor Keys KeyboardDolphin Back Panel FeaturesImage Engine Battery Well Battery Charging ContactsLaser Engine Hand StrapBumpers Communication Power Managing Battery PowerSetting Critical and Low Battery Points Using the Power Control PanelCriticalBatt=dworda LowBatt=dword19Charging the Battery Pack Servicing the Battery PackUsing the Battery Conditioning Utility Storing BatteriesUsing the Dolphin 7400/7450 Using the Image ReaderEntering Data Via the Touch ScreenLinear bar code 2D Matrix symbol Reading a Bar codeOmni-Directional Scanning Options Capturing ImagesCommunication Media Software Communication ProgramsUsing the Special Keys KeyboardsUsing the Cursor Keys To Use This Cursor Key Press DescriptionUsing the Modifier Keys Other Special KeysNavigating the Keyboard Key CombinationsUsing the Modem Dolphin 7400/7450 RF Terminal Configuring The Dolphin 7400/7450 RF Terminal Client Utilities for the Cisco Dsss 802.11b RadioConfiguring the Cisco Dsss Wlan Radio To Configure the Radio Card Host Connectivity Customizing the ActiveSync Remote IconPage Power Conditioning Dolphin Charging/Communication CradlesHub of the System Ir/IrDA Optical CommunicationsGreen LED Data is being sent from the Dolphin HomeBase HomeBase/IntelliBase/USB HomeBaseOrange LED AUX Battery LED Description Orange LED IntelliBase+Green LED Comm LED Description Red LEDBack Panel HomeBase/IntelliBaseIntelliBase+ USB HomeBase Bottom Panel of HomeBase/IntelliBase/IntelliBase+Powering the Dolphin Terminal Setting Up For Communications Charging Additional Battery Packs in the IntelliBase+Installing The Charging/Communication Cradle Deep-Cycling BatteriesIBM AT DB9 IBM XT Configuring the Dolphin Terminal for Communications Select StartSettingsControl PanelCommunications PropertiesPage Setting Up For Communications With The USB HomeBase Page Communicating with the Dolphin Terminal Desk Mounting Mounting the HomeBase/IntelliBase/USB HomeBaseWall Mounting Page Dolphin QuadCharger Parts and Function Dolphin QuadChargerTop Panel Setting Up The QuadCharger Supplying Power To The QuadChargerInserting and Removing Battery Packs Charging Batteries In The QuadChargerDescription Status LEDTroubleshooting Problem IssueDolphin Mobile Charging/Communication Cradles Mobile IntelliBase and Mobile Base Parts and Functions Front PanelDolphin Mobile IntelliBase/Mobile Base Mounting Bracket Power Supply RS-232 Connector Locking Lever RS-232 Bottom Panel of Mobile IntelliBase/Mobile Base Charging a Dolphin TerminalInstalling The Dolphin Mobile IntelliBase Mounting the Mobile IntelliBase Spring Arm AssemblyInstalling The Dolphin Mobile Base Setting the Baud Rate Configuring the Dolphin Terminal Select StartSettingsControl PanelCommunication SettingsDeveloping Applications Page Limited Warranty Warranty, Support and ServiceHow Problems Should Be Handled Return Information How To Extend Your WarrantyLocations Technical Assistance Assistance OnlineNorth America/Canada Europe, Middle East, and AfricaPage Windows Keyboard Shortcuts Appendix aPress Key Alpha/Numeric Keyboard Using the Modifier KeysKey Combination Function/Special Character Red key + T Red key + U Red key + W Red key + Y Key Numeric/Alpha Key Full Alpha Numeric Key/Key Combinations Function/Special Characters ALT + 3 +F12 Red key + P F16 Red key + Q F17 Hold the ALT key down as you type in the numbers HHP, Inc