Setting Up For Communications with the Mobile IntelliBase/Mobile Base
The Mobile IntelliBase
The IrDA 1.0 software stack is integrated into the Mobile IntelliBase/Mobile Base to allow communication between the cradle and devices such as modems or printers that are not IrDA ready or do not communicate with a half duplex serial protocol. This allows any full or half duplex
Installing The Dolphin Mobile IntelliBase
Mounting the Mobile IntelliBase Spring Arm Assembly
The adjustable mounting bracket holds the terminal securely in place and gives the user a variety of options for mounting the Mobile IntelliBase. See the directions below for mounting the bracket.
Ball joint
Turnscrew
To attach the bracket:
1.Loosen the turnscrew located on the side of the bracket.
2.Attach the bracket to the ball joint on the back of the Mobile IntelliBase and tighten the turnscrew.
8 - 7