Appendix A – Web Xpander Commands
Command | Description | Example |
:reset= | Resets the Web Xpander | :reset= |
:factory= | Load factory default | :factory= |
| values (follow with |
|
| :reset= to restart | (then optionally) :reset= |
| with these values) |
|
:ipaddr= | Sets the IP Address | :ipaddr=192.168.0.20 |
:ipmask= | Sets the Netmask | :ipmask=255.255.255.0 |
:ipgate= | Sets the Gateway Addr. | :ipgate=192.168.0.1 |
:dns= | Sets the DNS Address | :dns=192.168.0.1 |
:dhcp= | Enabled/Disables DHCP | :dhcp=1 |
:smtp= | Sets the outgoing | :smtp=smtp.comcast.net |
| (SMTP) mail server |
|
:user= | Sets the user name | :user=myname |
| required for access |
|
:pass= | Sets the password | :pass=mypass |
| required for access |
|
:webport= | Sets the port (default = | :webport=80 |
| 80) for the web server |
|
:telnet= | Sets the port (default = | :telnet=23 |
| 23) for |
|
| telnet (Ethernet to |
|
| Serial) |
|
:time= | Sets the internet Time | |
| server for time |
|
| synchronization |
|
:daily= | Sets the daily time sync | :daily=210 |
| in number of minutes | (i.e. 3:30am) |
| from midnight |
|
:netinfo= | Displays network | :netinfo= |
| settings |
|
:mailto= | Sets a email recipient – | :mailto=myemail@yahoo.com |
| Can be sent up to 5 | :mailto=someone@hotmail.com |
| times per message to |
|
| indicate up to 5 |
|
| recipients |
|
:mailfrom= | Sets the email sender | :mailfrom=myhouse@home.com |
:mailsubject= | Sets the email subject | :mailsubject=Test Email |
:mailbody= | Sets one or more lines of | :mailbody=Motion Sensor 1 |
| email text. | Activated |
| This command can be |
|
| sent multiple times up to |
|
| 500 characters total. |
|
:mailsend= | Sends the email | :mailsend= |