JDS Uniphase RS-232 specs

v1.6d 3-Aug-2003

•Modified DHCP routines. WebX was correctly reading IP address but incorrectly reading and storing Gateway and DNS info.

•Also read SMTP Mail server via DHCP if provided

v1.6e 8-Aug-2003

•Modified DHCP routines to try to solve remaining issues.

v1.6f 21-Aug-2003

•Adjusted TCP socket handling to prevent "hung" sockets

v1.6g 3-Sep-2003

•Corrected DHCP issue where Gateway was being misread

v1.7 9-Sep-2003

•Added support for Pocket WebX Access and Registration

v1.8d 19-Oct-2003

•Local caching of device status started (X10, Flags, Relays, Variables)

•"Bounce" network before time sync and periodically to clear any hung network sockets

•New WebX Labeler sends device type (Lamp, Lamp-ExCode, Appliance, etc.) so internal status can be set properly after 'All Lights On', 'All Lights Off', 'All Units Off' commands

•Track time of last WebX activity and automatically reboot every 24 hours but not within 15 minutes of last command

v1.8e 24-Oct-2003

•Adding more cleanup and optimization around timesync and general networking

•Added status messages to Com1 which can be monitored in the WinEVM MegaController window

v1.8f 3-Nov-2003

•Pocket WebX Support (Fixed Relay status)

•Added Digital and Analog status

v1.8g 10-Nov-2003

•Fixed SMTP bug where LF was used instead of CR,LF

•Disabled periodic network "bounce" and only reset network on failed TimeSync or Email

•Pocket WebX Support for All Lights On, All Lights Off

v1.9 21-Nov-2003

•Added FTP timeout to reset FTP server if connection is unexpectedly lost

•Made device status available over HTTP as well as FTP