Appendix D – Ethernet to Serial Bridge Functionality
The Web Xpander provides a method of sending/receiving serial data to/from the STARGATE via the Ethernet port using Telnet. Telnet is a terminal emulation program for TCP/IP networks. A telnet application comes with Microsoft Windows but you can also download other versions from the internet such as MochaSoft Telnet (http://www.mochasoft.dk).
The Web Xpander listens for incoming connections on a configurable port. The default telnet port is 23 but this can be changed on the Settings page.
To begin a telnet session, click “Start”, “Run” and type “telnet 192.168.0.5” (replacing 192.168.0.5 with the IP address of your Web Xpander. You should then be prompted for username and password which are the same as for the web pages. After entering a correct username/password you can type STARGATE commands (i.e. ##%07). Commands you type will be sent to the serial port of the STARGATE, and data received from the STARGATE will be sent via the network back to you.