JDS Uniphase RS-232 operation manual Example Event Disable Webx

Appendix J – Disabling the Web Xpander for Schedule Downloads and STARGATE Firmware Updates

To disable the Web Xpander (prior to downloading), send the ASCII string :disable=on "out of controller COM1."

For convenience, add an event to send the ASCII string in response to an X-10 ON command. The MegaController log will display ":disable=on" followed by "Web Xpander Disabled."

To re-enable the Web Xpander (after downloading), send the ASCII string :disable=off "out of controller COM1."

For convenience, add an event to automatically send the ASCII string after the First Pass Through Schedule followed by the X-10 OFF command. The MegaController log will display ":disable=off" followed by "Web Xpander Enabled. Rebooting...".

If you already have a First Pass Through Schedule event in use, place the ASCII string and X-10 OFF command at the end of the event.

EXAMPLE:

EVENT: DISABLE WEBX

If

XSEQ:( D-14 D-ON ) Received within 3 seconds

Then

ASCII-Out:':disable=on' [COM1]

End

EVENT: ENABLE WEBX

If

First pass through schedule

Then

ASCII-Out:':disable=off' [COM1]

X10: D-14 WebX Disable OFF

End