Netac Tech T610 user manual Internet Protocol TCP/IP Properties setup

Page 12

Netac AirTrack T610 Wireless Broadband Router

Figure 2.7 "Internet Protocol (TCP/IP) Properties" dialog box

7.Select "Obtain an IP address automatically" or "Use the following IP address", and then click "OK".

Figure 2.8 Internet Protocol (TCP/IP) Properties setup

Note:

a.With built-in DHCP server, T610 can assign IP address to LAN host computer automatically, it is suggested that users select “Obtain an IP address automatically”. Select "Use the following IP address", user should configure the parameter by hand, T610's default IP address is 192.168.1.1, the range of IP address can assigned to other computer are 192.168.1.2～192.168.1.254, subnet

7

Image 12

Contents Netac AirTrack T610 Wireless Broadband Router Remarks Radio Frequency Interference Remarks Page Table of Contents Checklist IntroductionWelcome Product functionAppearance Status DescriptionLogging on configuration ConnectingDefault ParameterConfigure TCP/IP Netac AirTrack T610 Wireless Broadband Router Netac AirTrack T610 Wireless Broadband Router Internet Protocol TCP/IP Properties setup Check Configuration Netac AirTrack T610 Wireless Broadband Router Log on configuration 12 detailed information14 logging 15 T610s configuration Router Configuration LANRadio Setting Field DescriptionSecurity WAN WANLAN Same subnetMAC Filter IP Filter Port Forward DMZAdmin Reconfirm Password fields and click ApplyAssociation Table Mode of build network Build at-home networkLAN configurations Build network of enterprise Access Internet through Adsl Modem 10 Radio setting Specifications LEDAppendix a FAQ When shall I use DMZ?My question is not included in FAQ, what shall I do? Appendix B Contact Netac Appendix C Glossary Infrastructure Mode ISM bandWi-Fi MbpsQoS RJ-45Wlan