Netac Tech user manual Netac AirTrack T610 Wireless Broadband Router

Page 14

Netac AirTrack T610 Wireless Broadband Router

Figure 2.10 communication successfully

3.If display message as follows:

"Pinging 192.168.1.1 with 32 bytes of data: Request timed out."

It means connected unsuccessfully. See Figure 2.11.

Figure 2.11 communication unsuccessfully

Communication unsuccessfully indicates wrong in the install, please check the items in turn as follows:

a.Make sure the computer is connected to T610 properly.

Mention: The link light on the computer's Network Interface Card is bright, and the LED that opposite to the 1# Ethernet port is bright.

b.Make sure the TCP/IP protocol is configured properly on the computer. Mention: Refer to "2.2 Configure TCP/IP" for details.

9

Image 14
Contents Netac AirTrack T610 Wireless Broadband Router Remarks Radio Frequency Interference Remarks Page Table of Contents Welcome ChecklistIntroduction Product functionAppearance Status DescriptionDefault Logging on configurationConnecting ParameterConfigure TCP/IP Netac AirTrack T610 Wireless Broadband Router Netac AirTrack T610 Wireless Broadband Router Internet Protocol TCP/IP Properties setup Check Configuration Netac AirTrack T610 Wireless Broadband Router Log on configuration 12 detailed information14 logging 15 T610s configuration Router Configuration LANRadio Setting Field DescriptionSecurity WAN WANLAN Same subnetMAC Filter IP Filter Port Forward DMZAdmin Reconfirm Password fields and click ApplyAssociation Table Mode of build network Build at-home networkLAN configurations Build network of enterprise Access Internet through Adsl Modem 10 Radio setting Specifications LEDMy question is not included in FAQ, what shall I do? Appendix a FAQWhen shall I use DMZ? Appendix B Contact Netac Appendix C Glossary Infrastructure Mode ISM bandQoS Wi-FiMbps RJ-45Wlan