Netac Tech T610 user manual MAC Filter

Page 23

Netac AirTrack T610 Wireless Broadband Router

3.5 MAC Filter

	Figure 3.5 MAC Filter Page
	Table 3.5 MAC Filter Settings

Field	Description

MAC Filter	Enable/Disable MAC filter mode.

Filter Mode	Allow or deny clients listed in "Stations List" to access T610.

Stations List	Up to 32 MAC addresses can be listed.

MAC addresses	List of MAC addresses to filter.

18

Image 23

Contents Netac AirTrack T610 Wireless Broadband Router Remarks Radio Frequency Interference Remarks Page Table of Contents Product function ChecklistIntroduction WelcomeStatus Description AppearanceParameter Logging on configurationConnecting DefaultConfigure TCP/IP Netac AirTrack T610 Wireless Broadband Router Netac AirTrack T610 Wireless Broadband Router Internet Protocol TCP/IP Properties setup Check Configuration Netac AirTrack T610 Wireless Broadband Router 12 detailed information Log on configuration14 logging 15 T610s configuration LAN Router ConfigurationField Description Radio SettingSecurity WAN WANSame subnet LANMAC Filter IP Filter DMZ Port ForwardReconfirm Password fields and click Apply AdminAssociation Table Build at-home network Mode of build networkLAN configurations Build network of enterprise Access Internet through Adsl Modem 10 Radio setting LED SpecificationsMy question is not included in FAQ, what shall I do? Appendix a FAQWhen shall I use DMZ? Appendix B Contact Netac Appendix C Glossary ISM band Infrastructure ModeRJ-45 Wi-FiMbps QoSWlan