Netac Tech T610 user manual Access Internet through Adsl Modem

Page 31

Netac AirTrack T610 Wireless Broadband Router

Figure 4.6 Admin page

Enter the LAN page. Enable DHCP server, set the start IP address to "192.168.1.10", the end IP address to "192.168.1.100".

Figure 4.7 LAN configuration

Configure WAN. According to the access mode, there are two configuration: use PPPoE protocol when access Internet through ADSL Modem, input "szhomeg@163.gd" in the PPPoE User Name field and "netac123" in the PPPoE Password field, then click "Apply"; use DHCP or Static protocol when access Internet through optic fiber, when use Static protocol, you need to configure IP address, gateway, subnet mask and DNS server, click "Apply" button to effect the configuration. Figure 4.8 details the configuration.

Access Internet through ADSL Modem

26

Image 31
Contents Netac AirTrack T610 Wireless Broadband Router Remarks Radio Frequency Interference Remarks Page Table of Contents Product function ChecklistIntroduction WelcomeStatus Description AppearanceParameter Logging on configurationConnecting DefaultConfigure TCP/IP Netac AirTrack T610 Wireless Broadband Router Netac AirTrack T610 Wireless Broadband Router Internet Protocol TCP/IP Properties setup Check Configuration Netac AirTrack T610 Wireless Broadband Router 12 detailed information Log on configuration14 logging 15 T610s configuration LAN Router ConfigurationField Description Radio SettingSecurity WAN WANSame subnet LANMAC Filter IP Filter DMZ Port ForwardReconfirm Password fields and click Apply AdminAssociation Table Build at-home network Mode of build networkLAN configurations Build network of enterprise Access Internet through Adsl Modem 10 Radio setting LED SpecificationsWhen shall I use DMZ? Appendix a FAQMy question is not included in FAQ, what shall I do? Appendix B Contact Netac Appendix C Glossary ISM band Infrastructure ModeRJ-45 Wi-FiMbps QoSWlan