Netac Tech T610 user manual Lan, Same subnet

Page 22

Netac AirTrack T610 Wireless Broadband Router

Password

user name and password.

 

 

Status

The relevant information for WAN connection.

 

 

3.4 LAN

 

Figure 3.4 LAN Page

 

Table 3.4 LAN Configurations

 

 

Field

Description

 

 

 

Set the IP address of T610. Default: 192.168.1.1.

IP Address

Note: To configure T610, the user must access T610 from a PC that is on the

 

same subnet.

 

 

Subnet Mask

Allow the user to specify a subnet mask. Default: 255.255.255.0.

 

 

Enable DHCP Service

Disable/Enable DHCP server.

 

 

Start IP Address

Set the starting IP address of DHCP server's IP address. Default: 192.168.1.100.

 

 

End IP Address

Set the ending IP address of DHCP server's IP address. Default: 192.168.1.150.

 

 

DHCP lease

Set the effective time of the IP address assigned by DHCP server.

 

 

17

Image 22
Contents Netac AirTrack T610 Wireless Broadband Router Remarks Radio Frequency Interference Remarks Page Table of Contents Welcome ChecklistIntroduction Product functionAppearance Status DescriptionDefault Logging on configurationConnecting ParameterConfigure TCP/IP Netac AirTrack T610 Wireless Broadband Router Netac AirTrack T610 Wireless Broadband Router Internet Protocol TCP/IP Properties setup Check Configuration Netac AirTrack T610 Wireless Broadband Router Log on configuration 12 detailed information14 logging 15 T610s configuration Router Configuration LANRadio Setting Field DescriptionSecurity WAN WANLAN Same subnetMAC Filter IP Filter Port Forward DMZAdmin Reconfirm Password fields and click ApplyAssociation Table Mode of build network Build at-home networkLAN configurations Build network of enterprise Access Internet through Adsl Modem 10 Radio setting Specifications LEDWhen shall I use DMZ? Appendix a FAQMy question is not included in FAQ, what shall I do? Appendix B Contact Netac Appendix C Glossary Infrastructure Mode ISM bandQoS Wi-FiMbps RJ-45Wlan