Netac AirTrack T610 Wireless Broadband Router
2 Logging on configuration page
Netac AirTrack T610 Wireless Broadband Router (T610) is configured by a Web page with password. Table2.1 list the default IP address, user name and password of T610 configuration Web.
Table 2.1 T610's default
Parameter
IP Address
User name
Password
Default
192.168.1.1
admin
password
User can log on T610's configuration page by desktop configured Ethernet Network Interface Card or laptop configured 802.11g/b Wireless Network Interface Card, in order to describe it convenient, we define the computer as computer A, the notebook PC as computer B (Figure 2.1).
Figure 2.1 Configure T610
Before logging on configuration page, user should prepare as following.
2.1 Connecting
1.Take out T610 from the pack, and put it on an appropriate place.
User can put T610 on the table or some plane object, or build it on the wall. In order to get the best effect, you’d better put T610 on the center position of the net which will be build, far away from some disturb fountain, such as, metal wall,
T610’s antenna can build up sensibility of wireless signal, generally, the high the antenna be put, the effect will be better. So we suggest you put T610 on a higher place, and adjust the antenna to upright position, then it can cover the whole physics room better.
Note:
3