Technical data

Power supply
Input voltage (nominal)	8 – 27Vdc.
Input voltage (MAX)	35Vdc.
Output voltage	5Vdc
External load	Up to 4A, depending on configuration and thermal
	conditions.
UPS interface:
4 pins in CN7	Run/stop, AUX1,AUX2,AUX3 (factory use only).
GSM-modem:
Modem type	GM47 (SonyEricsson).
SIM card interface	3V or 5V
Frequency range	EGSM 900 MHz	1800 MHz (Dual Band).
Maximum RF output power	2W	1W
Antenna impedance	50
Antenna connector type	MMCX RF connector
Supported I/Os (using AT	Available in 10pin connector
commands)
3 Analogue inputs *	8 bit, 0 – 2.75V
1 Analogue output *	8 bit, 0 – 2.475V
4 general purpose digital inputs *	0 – 2.75V
COM ports:
Number of ports	Two, one used for GSM modem
Addressing range	2C8h, 2D8h, 2E8h, 2F8h, 3D8h, 3E8h, 3F8h, disabled
IRQs supported	3, 4, 5, 7, 9, 10, 11, 12, 15
Connector	Port 2 available in 10pin box header.
Analogue inputs:
Resolution	12 bit
Inputs	8 ch. single ended or 4 ch. differential – one common
Isolation	1kV, 1 minute
Input range configurations	8 x 0–2.5V (default) or
(all unipolar)	8 x 0-5V or
	8 x 0-10V or
	8 x 0-20mA or
	4 x 0-20mA + 4 x 0-2.5V
Input impedance	1M (default).
Accuracy	0.5% of FSR, ±3LSB (default)
Conversion time	11us
Connector type	10 pin box header
Digital inputs:
Number of channels	8 isolated, one common ground
Digital logic levels	0 – 24V, non-polarity,
	Input low voltage: 0 – 1.5V
	Input high voltage: 10 – 24V
Page 18 / 21