Matsushita CF-29N3LGZBM manual Setting the HDD Main FPC, Arranging the HDD Main FPC

7.2.10. Setting the HDD Main FPC

1.Fix the HDD Main FPC to the Batt HDD CN Angle using the two Screws<a> and the two Screws<b>

2.Fix the CN Spacer to the Batt HDD CN Angle using the Screw<Z>.

3.Fix the Batt HDD CN Angle using the Screw<Y>.

Screw <Y>: DFHE5092ZA

Screw <Z>: DFHE5025ZA

Screws <a>: DRHM5104ZA

Screws <b>: DFHE5025XA

	EMP Sheet Batt HDD FPC
FPC Conduction	CN Spacer
Tape

<b>

Insulation Sheet

<b>

HDD Main

FPC <Y>

HDD Connector

Battery Connector

Batt HDD	<a>	<Z>
CN Angle
<a>		MINI PCI
		Spacer
		Battery Angle Sheet

View "A"

View "A"

Batt HDD

CN Angle

Press

Rib

Set the Batt HDD CN Angle sliding to the left so that the HDD Main FPC does not attach to the Rib of the Top Cabinet.

■Arranging the HDD Main FPC

HDD Main FPC HD FPC Tape	White line	Bend		White line
			Bend
1±1mm		90			HDD Main FPC
			180
1±1mm					Sheet
0~1mm					White line
White line	Cable Sheet
			Cable Sheet
0~2mm	Sheet			0±0.5mm	Bend
					180
			White line		Bend
Bend					180
90
Component side					Foil side

Attention when bending the FPC

1.Inside of bending should be from R0.5mm to R1mm.

2.Do not mistake the direction of bending.

<No good>

R0.5~1.0mm

2~3mm

7-24