Matsushita CF-29N3LGZBM manual Speaker Test, Vesa Mode Test, CPU A20 Gate Test, Cache ON/OFF Test

5.1.1. List of main test items

The selection item displays the items selected under Automatic test. If you select Automatic test, these test items will be performed automatically. You can use Selection test to choose items from the menu screen that you want to have tested.

These items are shown below.

	Test classification	Test items shown on the screen	Contents	Select
1		SPEAKER TEST	Speaker test
2		VESA MODE TEST	VESA mode test
3	CPU	A20 GATE TEST	Address A20 line
4	(CPU related)	CACHE ON/OFF TEST	Cache memory on/off test
5		NPU OPERAND TEST	Floating point processor function test
6	RAM (Memory related)	RAM STANDARD TEST	Memory standard test
7	CONTROL	DMA PAGE REG TEST	DMA page register test
8	(Control ICs on the main	DMA REGISTER TEST	DAM register test
9	board, etc.)	DMAC TRANSFER TEST	DAM transfer test
10		PIC HALT INSTRUCTION TEST	Interrupt controller halt instruction test
11		PIC REGISTER TEST	Interrupt controller register test
12		RTC CMOS RAM TEST	Real time clock CMOS test
13		RTC TEST	Real time clock test
14		PIT CH0 TEST	interrupt timer CH0
15		PIT CH1 TEST	interrupt timer CH1
16		PIT CH2 TEST	interrupt timer CH2
17	IO	KEYBOARD REG TEST	Keyboard test
18	(Input-output)	PS/2 MOUSE REG	Mouse registration test
19	COMMUNICATION	SERIAL WRAP TEST	Serial loop back (jig required)
20		SERIAL ALL INTERNAL TEST	Serial port interior test
21		PARALLEL REGISTER R/W	Parallel register R/W test
22	AUX	PCIC ALL TEST	PCIC test
23	(Auxiliary functions)	Card Bus Reg	Card Bus register test
24		USB Reg	USB register test
25	VIDEO	VGA ALL TEST	VGA test
26	(Display related)	SVGA RAM TEST	SVGA RAM test
27	DISK	FD WT/RD/WP TEST	FD WT, RD WP test
28	(FDD, HDD)	HDD ALL TEST	Only HDD lead test selected
29	UNIQUE	ECP REGISTER R/W	ECP register R/W test
30	(Individual functions)	EPP REGISTER R/W	EPP register R/W test
31		EXT. CMOS R/W TEST	Extension CMOS R/W test

Test function settings

Test condition save/play	Following file command
Test automatic execute	Test executed on run settings by selecting command
Error display (Paging style)	Select displayed items Error, Log, Option

5.2. Automatic Test

Test execution

From the menu screen shown below For Celeron models Select and press Enter for DIAG on FD

1.DIAG on FD

2.LAN test

3.Modem test

4.Wireless LAN test (Wireless LAN Model only)

5.CD testQ. Quit

menu screen

5-2