Sharp MX-M1100 Sending an image in fax mode, Enter the fax number of the receiving fax machine

Sending an image in fax mode

The following example explains how to set the resolution to [Fine] and [Half Tone] when sending an original with small text.

The side to be scanned must be face up!

1 Place the originals.

When using the document glass, place the original with the side to be scanned face down.

2 Enter the fax number of the receiving fax machine.

(1)

Scan	Internet Fax	Fax		Data Entry		USB Mem. Scan
Address Book	Original	Scan:	Auto	A4	Send:	Auto

Direct TX	Exposure			Auto
Sub Address			Standard
	Resolution
	(2)
Address Review
File
Quick File
					Auto Reception
			Fax Memory:100%
Fax/Resolution						OK

(5)

Standard

Fine

(3)

Super Fine Half Tone

(4)

Ultra Fine

3 Select settings in the touch panel.

(1)Make sure that the desired mode ([Fax] tab) is selected.

(2)Touch the [Resolution] key.

(3)Touch the [Fine] key.

The resolution increases (producing a clearer image) in the following order: [Standard], [Fine], [Super Fine], [Ultra Fine].

(4)Touch the [Half Tone] key.

Select [Half Tone] for a photo or illustration with shading to further improve the image.

[Half Tone] cannot be selected when [Standard] is selected.

(5) Touch the [OK] key.

4 Press the [START] key.

Correct a mistake Cancel scanning

79