Korg KORG Pa50 user manual Program, Disk mode

236Error messages & Troubleshooting

Error messages

Standard Midi File format 2

You have tried to read a Format 2 Standard MIDI File. Pa50 can’t play this kind of file. Select a Standard MIDI Files in 0- and 1-format.

Program

Overwrite Program? (Enter/Exit)

You are trying to store a Program to a memory location already occupied by a Program. Press ENTER to overwrite it, or EXIT to abort.

Disk mode

Can’t Erase Old Korg Resource (Press Exit)

You can’t erase a single Style from a Korg i-series disk. You can only delete a whole file.

Can’t Read Disk! (Press Exit)

The disk is probably damaged. Try again. If the message appears again, try with a different disk.

Can't Read File! (Press Exit)

The file you are trying to load, copy, erase or rename is dam- aged, or has a null size (0 kb), thus can’t be read. This mes- sage during a New Dir operation means there are problems on the disk. Try loading the file from a different disk.

Copy Failed! (Press Exit)

An error occurred during Copy. Copy operation aborted.

Copy: Invalid Destination (Press Exit)

You tried to copy an ordinary file or folder into a “.SET” folder.

Corrupted Style Perf. Save it again

The Style Performance is damaged. Save it again by pressing WRITE, and selecting the “Current Style” option.

Delete all data. Continue? (Enter/Exit)

Formatting will delete all data on the disk you are ready to format. Be sure you have a copy of all data you wish to pre- serve.

Delete Destin. Files Failed! (Press Exit)

The file you were trying to overwrite could not be deleted.

Destination File Exists (Press Exit)

The file you are trying to copy already exists on target.

Directory Full (Press Exit)

You reached the maximum folder number for the root of the selected medium:

•720 kb floppy disk: max 112 folders

•1.44 Mb floppy disk: max 224 folders Delete some files, or replace the disk.

Directory Not Empty (Press Exit)

You were trying to delete a directory still containing files. Delete these files, then delete the directory.

Directory not found (Press Exit)

The directory is not in the current medium. The disk has probably been replaced before finishing the disk operation. Insert the disk again, and try again.

Disk Full (Press Exit)

Disk not empty! (Sh+Enter to Format)

During a Backup, you inserted a disk containing some data. Please replace it with an empty one, or press SHIFT+ENTER to start formatting the disk.

Disk write-protected

The floppy disk is write-protected. Move the protection tab to close the hole, and try again. Be sure there aren’t data you don’t want to overwrite. Otherwise, replace the disk with an empty one.

Erase Failed! (Press Exit)

An error occurred during Erase. Erase operation aborted.

Error while converting (Press Exit)

While trying to load Korg i-series data, some errors occurred. The original file is probably corrupted, or its structure is too different from Pa-series data.

Error while formatting medium

An error was reported when formatting the medium (disk). The format procedure has been aborted. Try again. If format- ting a floppy disk, replace the disk and try again.

Error while Writing! (Press Exit)

An error was reported while writing on the medium (disk). The procedure has been canceled. Select a different medium, and try again.

Existing Files Not Copied (Press Exit)

After a Copy procedure (no Overwrite selected), all files shar- ing the same name have not been copied.

Factory Styles Protected! (Press Exit)

The “.SET” file you just loaded included some banks of Fac- tory Styles. Since the Factory Style Protect flag was switched on, Factory Style banks were not loaded. (See “Factory Style Protect” on page 142).

Fast Format Failed. Full Format? (Enter/Exit)

The Fast Format procedure failed. Press ENTER to go on with a Full Format procedure (slower).

File is protected

You have tried to write over a read-only or system file. Pa50 can’t write over this kind of files. Should you need to write over one of these file, use a personal computer to change the file’s properties, then try again. Read your computer’s user’s manual.

File/Dir Already Existing (Press Exit)

During a Rename or New Dir operation, you were trying to use an existing name. Use a different name.

File in Use (Press Exit)

The file you tried to delete is in use by another procedure. Wait for the procedure to be completed, then try again.

Files in Use Not Deleted (Press Exit)

This message may appear during an Erase operation. Files used by other procedures have not been erased.

Files in use have not been overwritten

This message may appear during a Copy with Overwrite operation. Files used by other procedures have not been cop- ied.

File Is Protected (Press Exit)

The selected medium (disk) is full. Delete files you are not interested to keep, or replace the disk with an empty one. Then, try again.

You were trying to overwrite a protected file.