Korg KORG Pa50 user manual Auto-Pan, Depth= 100, Envelope Amount=, Stereo Auto Pan, LFO Phase

196Effects

Mod./P.Shift

“Depth”=100, “Envelope Amount”=–100
			Shimmer
Level		Dry Envelope	LFO Frequency[Hz]=8.0
			Envelope Amount[Hz]= –7.0Hz
	Louder		Depth=100
			Envelope Amount= –100
			Time

034: Auto-Pan

(Stereo Auto Pan)

This Auto Pan effect pans sound between left and right. It is stereo, and shifting the left and right LFO phases from each other will simulate the sound of the left and right channels crossing over each other by turns, or chasing each other.

Stereo In - Stereo Out
Left	Wet / Dry
	Pan
	Depth
	Pan
Right	Wet / Dry
	LFO Phase
LFO: Tri / Sin	LFO Shape

	LFO Waveform			Triangle, Sine
a	Selects LFO Waveform
	LFO Shape		–100...+100
	Determines how much the LFO waveform is changed					☞
b	LFO Phase [degree]		–180...+180
	Sets the LFO phase difference between the left and right					☞
	LFO Frequency [Hz]	0.02...20.00Hz
	Sets the LFO speed	☞ Fx:009,
c	Src				Off...Tempo
	Selects the modulation source of LFO speed
	Amt	–20.00...+20.00Hz
	Sets the modulation amount of LFO speed
	BPM/MIDI Sync			Off, On
	Switches between using the frequency of the LFO speed and using the
	tempo and notes	☞ Fx:009,
	BPM			MIDI, 40...240
d	Selects MIDI Clock and assigns tempo					☞ Fx:009
	Base Note		☞ Fx:009
	Selects the type of notes that specify the LFO speed
	Times		x1...x16
	Sets the number of notes that specify the LFO speed		☞ Fx:009

	Depth		0...100
	Sets the depth of LFO modulation
	Src		Off...Tempo
e	Selects the modulation source of the depth of modulation
	Amt		–100...+100
	Sets the modulation amount of the depth of modula-
	tion
	Wet/Dry	Dry, 1:99...99:1, Wet
	Table , “Sets the balance between the effect and dry sounds,” on page 175
f	Src		Off...Tempo
	Table , “Selects the modulation source of the effect balance,” on page 175
	Amt		–100...+100
	Table , “Sets the modulation amount of the effect bal-
	ance,” on page 175

a: LFO Shape

You can change the panning curve by modifying the LFO waveform.

b: LFO Phase

This parameter determines the difference in the left and right LFO phases. When you change the value gradually from 0, the sound from the left and right channels will chase each other around. If you set the parameter to +180 or –180, the sound from each channel will cross over each other.

You need to input different sounds to each channel in order for this parameter to be effective.

				Stereo Auto Pan - LFO Phase
LFO Phase = 0 degrees			LFO Phase = 90 degrees	LFO Phase = 180 degrees
	L-In		L-In	L-In
	R-In		R-In	R-In
		L-In	L-In	L-In
		R-In	R-In	R-In
	L-In		L-In	L-In
	R-In		R-In	R-In
L-In			L-In	L-In
R-In			R-In	R-In
	L-In		L-In	L-In
	R-In		R-In	R-In
Left	Center	Right
	Output Stereo Image