Korg KORG Pa50 user manual Edit Velocity, Event Edit, Transport, navigation and editing controls

PAGE 3 - EDIT: VELOCITY

In this page you can change the velocity (dynamics) value of notes in the selected track.

Edit:Velocity
EV1 CV:CV1	Trk:DRUM
	Value:+000
S001-01-000	E001-01-192
Bottom:G-1	Top:C8

After setting the various parameters, press ENTER to execute. The “Are you sure?” message will appear. Press ENTER to confirm, EXIT to abort.

E/CV (Style Element/Chord Variation)

(Non editable) These read-only parameters show which Style Element and Chord Variation are currently selected for edit- ing. See the Main page “E (Style Element)” and “CV (Chord Variation)” parameters on page 55 for information on select- ing a different Style Element and Chord Variation.

Trk (Track)

Use this parameter to select a track.

All All tracks selected. The velocity for all notes of the whole selected Chord Variation will be changed.

Drum…Acc5 Selected track.

Value

Velocity change value (±127).

S / E (Start/End)

Use these parameters to set the starting (S) and ending (E) points of the range to be modified.

If a Chord Variation is four measures long, and you want to select it all, the Start will be positioned at 1.01.000, and the End at 5.01.000.

Bottom / Top

Use these parameters to set the bottom and top of the key- board range to be modified. If you select the same note as the Bottom and Top parameters, you can select a single percus- sive instrument in a Drum or Percussion track.

Note: These parameters are available only when a Drum or Percussion track is selected.

PAGE 4 - EVENT EDIT

The Event Edit page allows you to edit each event in a single track. See “Event Edit procedure” on page 64 for more infor- mation on the event editing procedure.

Event Edit

Trk: DRUM E:V1 CV:CV1

Position: 001.01.000

Ev: Note F#2 72

Lenght:000.00.000

Style Record mode 63

Page 3 - Edit: Velocity

Trk (Track)

Track in edit. To select a different track, press one of the A VOLUME/VALUE buttons to open the Go To Track window.

Go to Track: DRUM

Enter=Ok Exit=Cancel

Use the TEMPO/VALUE controls to select a track, and press ENTER to confirm, or EXIT to abort.

E/CV (Style Element/Chord Variation)

Selected Style Element and Chord Variation. This parameter can’t be edited. To select a different Style Element and Chord Variation, press EXIT to go back to the Main page of the Style Record mode (see “Main page” on page 55).

Position

Position of the event shown in the display, expressed in the form ‘aaa.bb.ccc’:

•‘aaa’ is the measure

•‘bb’ is the beat

•‘ccc’ is the tick (each quarter beat = 384 ticks)

You can edit this parameter to move the event to a different position.

Ev (Event)

Type and values of the event shown in the display. Depending on the selected event, the value may change. This parameter also shows the (non-editable) “End Loop” marking, when the end of a track is reached.

Event	First value	Second value
Note	Note name	Velocity
Ctrl	Control Change number	Control Change value
Bend	Bending value	–

To change the event type, use the C VOLUME/VALUE but- tons to select the Event line, then use the same buttons or the TEMPO/VALUE controls to select a different event type.

To select and edit the event’s value, use the F3 and F4 func- tion keys, and use the G/VOLUME/VALUE buttons or the TEMPO/VALUE controls.

Length

Length of the selected Note event. The value format is the same as the Position value.

Note: If you change a length of “000.00.000” to a different value, you can’t go back to the original value. This rather uncommon zero-length value may be found in some drum or percussion tracks.

Transport, navigation and editing controls

E/F and H VOLUME/VALUE buttons

These buttons are the “Scroll to previous event” (E/F) and “Scroll to next event” (H) controls. They corresponds to the scrolling arrows shown on the screen.

G VOLUME/VALUE buttons

Use these buttons to select the corresponding parameter value area.

Event Type First value Second value