Korg KORG Pa50 user manual Write Window, Selected Sequencer

72Song Play operating mode

The Write window

100The quantize window extends to the nearest window; all events are quantized.

Win=0

Win=50

Win=100

THE WRITE WINDOW

You can save onto the internal memory a Seq1+Seq2 Setup. There is a separate Setup for each of the two onboard sequencers.

This Setup memorizes the Internal FX settings, the Internal/ External status of each track, and the Play/Mute status of each track. When a new Song is selected, the saved Setup is automatically recalled, and all parameters are reset.

•Globally setting the Internal FX parameters allows you, for example, to assign to all Songs a Reverb suitable for the venue where you are performing, without having to modify any of the Songs. (This is true only for non- Pa50/80 Songs).

•Globally setting the Internal/External status allows you, for example, to send the Piano track of all Songs to a dedicated expander (just set globally the Piano track to the External mode).

•The Play/Mute status allows you to globally mute tracks that you don’t want to play during a show, for example the melody track. (This is ture only for non-Pa50/80 Songs).

For more information on the Internal FX settings for the Song Play mode, see “Page 3 - Mixer: FX send A/B” or “Page 3 - Mixer: FX send C/D”, and following, on page 76.

Here is the procedure to save the Seq1+Seq2 Setup in mem- ory.

1.Press WRITE. The Write page appears.

WRITE:

Press 'Enter/Yes' to memorize

the Seq 1/2 Setup

MAIN PAGE

Press SONG PLAY to access this page from another operating mode.

Note: When switching from Style Play to Song Play, the Song Setup is automatically selected, and various track parameters may change.

Press EXIT/NO to access this page from the Menu or any of the Song Play edit pages.

To see the Song’s tracks, use the TRACK SELECT button to switch from the main page (showing the Realtime tracks), to the other tracks. Pressed a first time, you will see tracks 1-8 (enlightened TRACK SELECT LED); a second press will show tracks 9-16 (flashing TRACK SELECT LED); pressed again, you will go back to the Realtime tracks (TRACK SELECT LED switched off).

	Selected Sequencer
Song Play icon	Page header	Measure number

No song

S1:	Piano01
S2:	Guitar01
Lyrics	StrngEns2
	VoxPad1

Song select commands	Realtime (Keyboard) tracks
Song Play icon

When on, this icon shows that the instrument is in Song Play mode.

Page header

This line shows the currently selected sequencer, and the assigned Song (“S1:Song Name” or “S2:Song Name”).

When no Song is assigned to the current sequencer, this line shows only the selected sequencer number (“S1:” or “S2:”, depending on the selected sequencer).

When no sequencer or Song is selected, only the “No Song” text appears.

Press either A (S1:) or B (S1:) to switch between Sequencer 1 and Sequencer 2. When one of the sequencers is selected, the sequencer number is also shown at the right of the metro- nome Tempo.

2. Press ENTER to confirm, or EXIT to abort. If you confirm, the Setup is saved into the Global. You

may then save this Setup on disk together with the Glo-

bal data.

When a Jukebox file is in play, its name appears on the page header.

Selected Sequencer

These indicators show if the currently selected sequencer is Seq1 or Seq2. Use the A and B VOLUME/VALUE buttons to select a sequencer.