Korg KORG Pa50 user manual 193, Doppler

	Wet/Dry	Dry, 1:99...99:1, Wet
	Table , “Sets the balance between the effect and dry sounds,” on page 175
j	Src		Off...Tempo
	Table , “Selects the modulation source of the effect balance,” on page 175
	Amt		–100...+100
	Table , “Sets the modulation amount of the effect bal-
	ance,” on page 175

a:Control Mode, e: Voice1: Resonance, h: Voice2: Resonance

This parameter determines the resonance intensity. When “Control Mode” = Manual, the “Resonance” parameter sets the intensity of resonance. If the “Reso- nance” parameter has a negative value, harmonics will be changed, and resonance will occur at a pitch one octave lower.

When “Control Mode” = LFO, the intensity of resonance varies according to the LFO. The LFO sways between posi- tive and negative values, causing resonance to occur between specified pitches an octave apart in turn.

When “Control Mode” = D-mod, the resonance is con- trolled by the dynamic modulation source. If JS X or Rib- bon is assigned as the modulation source, the pitch an octave higher and lower can be controlled, similar to when LFO is selected for Control Mode.

a:LFO/D-mod Invert

When “Control Mode” = LFO or D-mod, the controlled phase of either Voice 1 or 2 will be reversed. When the resonance pitch is set for Voice 1 (Resonance has a positive value), Voice 2 will resonate at a pitch an octave below (Resonance has a negative value).

d:Voice1: Pitch, d: Fine [cent], g: Voice2: Pitch, g: Fine [cent]

The Pitch parameter specifies the pitch of resonance by note name. The “Fine” parameter allows for fine adjust- ment in steps of cents.

e:High Damp [%], h: High Damp [%]

This parameter sets the damping amount of resonant sound in the high range. Lower values will make a metal- lic sound with a higher range of harmonics.

030: Doppler

This effect simulates the “Doppler effect” of a moving sound with a changing pitch, similar to the siren of an passing ambulance. Mixing the effect sound with the dry sound will create a unique chorus effect.

Wet: Mono In - Stereo Out / Dry: Stereo In - Stereo Out
Left		Wet / Dry
	+	Doppler
		Pan Depth
Right		Wet / Dry
		LFO
D-mod	Trigger	LFO Mode = 1-Shot

	LFO Mode	Loop, 1-Shot
a	Switches LFO operation mode	☞ ,
	Src	Off...Tempo
	When LFO Mode is set to 1-Shot, this modulation source triggers the LFO
	☞
b	LFO Sync	Off, On
	Switches between LFO reset on and off when LFO Mode is set to Loop☞

				Effects					193
		Pitch/Phase Mod.
	LFO Frequency [Hz]			0.02...20.00Hz
	Sets the LFO speed		☞ Fx:009,
c	Src							Off...Tempo
	Selects the modulation source of LFO speed
	Amt		–20.00...+20.00Hz
	Sets the modulation amount of LFO speed
	BPM/MIDI Sync					Off, On
	Switches between using the frequency of the LFO speed and using the
	tempo and notes		☞ Fx:009,
	BPM					MIDI, 40...240
d	Selects MIDI Clock and assigns tempo							☞ Fx:009
	Base Note				☞ Fx:009
	Selects the type of notes that specify the LFO speed
	Times				x1...x16
	Sets the number of notes that specify the LFO speed				☞ Fx:009
	Pitch Depth							☞ ,	0...100
	Sets the pitch variation of the moving sound
e	Src							Off...Tempo
	Selects the modulation source of pitch variation
	Amt						–100...+100
	Sets the modulation amount of pitch variation
	Pan Depth						–100...+100
	Sets the panning of the moving sound							☞ ,
f	Src							Off...Tempo
	Selects the modulation source of panning
	Amt						–100...+100
	Sets the modulation amount of panning
	Wet/Dry		Dry, 1:99...99:1, Wet
	Table , “Sets the balance between the effect and dry sounds,” on page 175
g	Src				Off...Tempo
	Table , “Selects the modulation source of the effect balance,” on page 175
	Amt						–100...+100
	Table , “Sets the modulation amount of the effect bal-
	ance,” on page 175

a: LFO Mode, a: Src, b: LFO Sync

The “LFO Mode” parameter switches LFO operation mode. When Loop is selected, the Doppler effect will be created repeatedly. If “LFO Sync” is set to On, the LFO will be reset when the modulation source specified with the “Src” parameter is turned on.

When “LFO Mode” is set to 1-Shot, the Doppler effect is created only once when the modulation source specified in the “Src” field is turned on. At this time if you do not set the “Src” parameter, the Doppler effect will not be created, and no effect sound will be output.

The effect is off when a value for the modulation source speci- fied for the “Src” parameter is smaller than 64, and the effect is on when the value is 64 or higher. The Doppler effect is trig- gered when the value changes from 63 or smaller to 64 or higher.

e: Pitch Depth

With the Doppler effect, the pitch is raised when the sound approaches, and the pitch is lowered when the sound goes away. This parameter sets this pitch variation. f: Pan Depth

This parameter sets the width of the stereo image of the effect sound. With larger values, the sound seems to come and go from much further away. With positive values, the sound moves from left to right; with negative values, the sound moves from right to left.

Pitch			Doppler - Pitch / Pan Depth
Higher		= (+) value	= (–) value
		Pan Depth	Pan Depth
Original Pitch					Pitch Depth
Lower
	Left		Center	Right
			Pan Depth
<		< < < < <<<<<< >>>>>> > >		> > >
		Louder	Volume	Louder