Korg KORG Pa50 user manual Realtime Recording

No quantization applied. (1/8)

Grid resolution, in musical values. For exam- ple, when you select 1/8, all notes are moved to the nearest 1/8 division. When you select 1/4, all notes are moved to the nearest 1/4 division.

The track is muted. If this tracks has already been recorded, it will not be heard during recording of the other Backing Sequence track. The track is in play. If there are recorded data, they will be heard during recording of the other Backing Sequence track.

The track is in record. All previously recorded data will be deleted.

REALTIME RECORDING PAGE

While you are in Backing Sequence mode, press RECORD, then one of the A VOLUME/VALUE buttons, to access the Realtime Recording mode. The RECORD LED turns on.

Rec:NewSong
Style:NewBossa		99%
Perf:01-01	Metro:On1
Resol:HI	RT/Pad:REC
Sel.Tempo	Ch/Acc:REC

Style

This non-editable parameter shows the selected Style. If no Style is selected, the name will be empty. You can select a dif- ferent Style, using the STYLE section (see “Selecting a Style” on page 26).

0…99%

This non-editable parameters shows the remaining recording space in memory, as a percentage.

Perf or STS (Performance or STS)

This non-editable parameter shows the selected Performance or STS (depending on the last item selected). If no Perfor- mance or STS is selected, the name will be empty. You can select a different Performance, using the PROGRAM/PER- FORMANCE section (see “Selecting a Performance” on page 25). To select one of the four STS for the current Style, use the F1-F4 buttons.

Resol (Resolution)

Use this parameter to set the quantization during recording. Quantization is a way of correcting timing errors; notes played too soon or too later are moved to the nearest axis of a rhythmic “grid”, set with this parameter, thus playing per- fectly in time.

Hi (1/32)…

Hi (no quantiza- tion)

1/16

1/8

Sel.Tempo (Select Tempo)

Select this parameter to use the TEMPO/VALUE section to select the Tempo. When you select this parameter, the VALUE LED turns off.

Metro (Metronome)

This parameter sets the metronome mode during recording.

Off The metronome can be heard only during the precount.

Backing Sequence operating mode 85

	Realtime Recording page
On1	The metronome plays during recording.
	Recording begins with a 1-bar precount. Start
	recording after bar -1.
On2	The metronome plays during recording.
	Recording begins with a 2-bar precount. Start
	recording after bar -1.

RT/Pads

Ch/Acc

These parameters let you decide the track status during recording.

RT/Pads: This Backing Sequence track includes the four Realtime (Keyboard) tracks, and the four Pads. They will be Song tracks 1-8, as in the following table:

RT/Pad track	Song track/Channel
Upper 1	1
Upper 2	2
Upper 3	3
Lower	4
Pad 1	5
Pad 2	6
Pad 3	7
Pad 4	8

Ch/Acc: This Backing Sequence track includes all Style tracks, including recognized chords. They will be Song tracks 9-16.

MUTE

PLAY

REC

CHORD/ACC STEP RECORDING PAGE

While you are in Backing Sequence mode, press RECORD, then one of the B VOLUME/VALUE buttons, to access the Chord/Acc Step Recording mode. The RECORD LED turns on.

Step Chord/Acc

M001.01.000 Tempo:120

Style:Umpl_Bossa

Perf :01-1 SE:Off

C Maj - /C

Side arrow ( )

The small arrow next to a parameter means that its value is effective at the current position. For example, if you are at the “M003.01.000” position, and an arrow lights up next to the Chord parameter, this means that a chord change happens at the “M003.01.000” position.