Korg KORG Pa50 File Not Found Press Exit, Format Completed Press Exit, Format aborted Press Exit

File Not Found (Press Exit)

The file is not in the current medium. The disk has probably been replaced before finishing the disk operation. Insert the disk again, and try again.

Format Completed (Press Exit)

Formatting has been successfully completed.

Format aborted (Press Exit)

Format operation aborted.

Format failed! (Press Exit)

An error occurred during Format. Format operation aborted.

Illegal name (Press Exit)

The name is not allowed on Pa-series instruments.

Insert 1.4MB FD and press Enter

While saving the operating system, Pa50 asks for a floppy disk (1.44 Mbyte, High Density).

Insert 1.4MB FD #[n] and press Enter

While executing a Backup procedure (see “Backup Data” on page 141), Pa50 asks for the first floppy disk (1.44 Mbyte, High Density). After filling this disk, the following disks will be asked for.

Place the label on the disks, and write their progressive num- ber on it. You will use these numbers when restoring data (see “Restore Data” on page 142).

Insert Backup FD n.[n] and Press Enter

During a Restore operation (see “Restore Data” on page 142), you are prompted to insert Backup disks. Insert the disk with the shown number.

Invalid Copy Parameter (Press Exit)

The copy operation was not possible. Maybe you were trying to copy a file over itself, or copying nested folders.

Load Failed! (Press Exit)

The Load procedure has not been executed. Try again, or try with different files.

Make New Dir Failed! (Press Exit)

While trying to create a new directory, an error occurred.

Media Write-Protected (Press Exit)

The disk is physically protected. Remove the protection, and try again.

Memory full

This message appears in Backing Sequence mode, when the memory for recording a Song is full.

No Disk/Unformatted. (Sh+Enter to Format)

Either there is no floppy disk in the drive, or the disk is unformatted. Insert a disk, and try again, or press SHIFT+ENTER to start formatting the disk.

Not a Pa-series or Corrupted File

Error messages & Troubleshooting 237

Error messages

Not Enough Space on Media

There is no more space to load, save or copy data. The disk operation will be aborted. Replace the disk, and use an empty disk to save your data. Should this message appear during loading, the SSD (Solid State Disk)-based internal memory is full.

Nothing to Rename (Press Exit)

There are no items to rename.

Overwrite Existing File? (Yes/No)

You are writing data on an existing “.SET” folder, or on a file of type “.MID” or “.JBX”.

Overwrite on Backup? (Enter/Exit)

Press ENTER/YES to overwrite files carrying the same name on the target device, or EXIT/NO to avoid overwriting any file.

Overwrite on Copy? (Enter/Exit)

Press ENTER/YES to overwrite files carrying the same name on the target device (Press Exit)/NO to avoid overwriting any file. File that are not yet on disk are always copied.

Overwrite Protected Files? (Enter/Exit)

Protected files cannot usually be overwritten. By pressing ENTER, you can overwrite them during the current opera- tion.

Rename: Invalid Name (Press Exit)

You can’t use the name you entered. Please retry and select a different name.

Rename: New Name Must Be a \".SET\

You can’t modify a “.SET” folder extension.

Rename Failed! (Press Exit)

An error occurred during Rename. Rename operation aborted.

Save Failed! (Press Exit)

An error occurred during Save. Save operation aborted.

Some Files Missing (Press Exit)

This message may appear at the end of a Restore operation. Some User file may be missing. This is not a problem for the Factory Data integrity.

Unit Not Found (Press Exit)

You were trying to access a storage device not available on your instrument.

Unformatted medium

You have selected a medium (disk) that is not yet formatted, or is in a format that Pa50 can’t recognize. Format the medium using the Format procedure (see “Page 5 - Format” on page 140).

Wait

The file you are trying to load is not compatible with Pa- series instruments.

Pa50 is busy with a disk operation.