138Disk edit environment

Page 2 - Save

8.The content of the target disk appears in the display.

Disk:Save

NEW_NAME.SET

LIVE.SET

ETHNICA.SET

FD SAVE OPEN CLOSE

At this point, you can:

Create a new “.SET” folder (see “Creating a new “.SET” folder” on page 138).

Save onto an existing “.SET” folder (saved data is merged with the existing data on disk).

9.If you are saving into an existing folder, move the desired “.SET” folder to the first line of the display, using the E-H (Scroll) buttons (or the TEMPO/VALUE con- trols).

10.Press F2 (Save) to confirm. A list of files on the target device appears. Only files of the selected type are shown.

Disk:Save

to U1: 1 16BeatNew to U1: 2 8Beat

to U1: 3 _ _ _ _ _ _

FD SAVE OPEN CLOSE

Locations marked with a row of underscores (“___”) are empty locations.

11.Use the E-H (Scroll) buttons (or the TEMPO/VALUE controls) to move the target location to the first line of the display.

12.Once the target location is selected, press F2 (Save) to save the file. The “Are you sure?” message will appear. Press ENTER to confirm, or EXIT to abort.

Warning: If you confirm, any data at the target location will be deleted.

When the operation is completed (the “Wait” indicator disappears), the source page comes back in the display, and you may perform further saving operations.

Creating a new “.SET” folder

When saving data (Save operations), you can save onto exist- ing folders, or you can create a new “.SET” folder. Here is how to do it.

1.When the file list of the target disk is in the display, use the E-H (Scroll) buttons (or the TEMPO/VALUE con- trols) to move the “NEW_NAME.SET” item to the first line of the display.

Note: A “NEW_NAME.SET” item is always the first item in any directory.

2.When the “NEW_NAME.SET” item is selected, press one of the A VOLUME/VALUE buttons. You are prompted to assign a name to the new folder:

NEW_NAME.SET

3.Move the cursor using the DOWN/- and UP/+ buttons. Select a character using the DIAL. Insert a character at the cursor position by pressing the INSERT button. Delete a character at the cursor position by pressing the DELETE button.

4.When you have finished writing a name for the new folder, press F2 (Save) to confirm. The “Are you sure?” message will appear. Press ENTER to confirm, or EXIT to abort.

Page 140
Image 140
Korg KORG Pa50 user manual Newname.Set, Creating a new .SET folder