Korg KORG Pa50 user manual Mixer Volume, Mixer PAN, Mixer FX Send, MixerPan

ing one of the two buttons in a pair, or using the TEMPO/ VALUE controls.

PAGE 1 - MIXER: VOLUME

This page lets you set the volume for each of the Realtime (Keyboard) or Style tracks.

Use the TRACK SELECT button to switch from the Realtime (Keyboard) tracks to the Style tracks, and vice versa.

Mixer:Volume

127 090

100 092

127 086

112

Mixer:Volume

110		090
100			092
	110		086
	110	112

Volume

Track’s volume.

0…127 MIDI value of the track’s volume.

PAGE 2 - MIXER: PAN

This page lets you set the pan (position in the stereo front) for each track.

Use the TRACK SELECT button to switch from the Realtime (Keyboard) tracks to the Style tracks, and vice-versa.

Mixer:Pan

- - - - -	C+00
R+20	C+00
- - - - -	C+10
	C+00

	Style Play operating mode 43
	Page 1 - Mixer: Volume
R+63	Hard Right.
Off	The direct (uneffected) signal does not go to
	the outputs; only the FX signal is heard for this
	track.

PAGE 3 - MIXER: FX SEND

This page lets you set the level of the track’s direct (unef- fected) signal going to the Internal FX processors. The effect processors included in Pa50 are connected in parallel, so you can decide which percentage of the direct signal should be effected:

Track Output

FX Processor

There are four Internal FX processors in Style Play mode. You can assign them any kind of available effects, but we found it convenient to arrange them in the following way, for all the Styles included with the Pa50:

AReverb processor for the Style tracks.

BModulating FX processor for the Style tracks.

CReverb processor for the Realtime (Keyboard) tracks.

DModulating FX processor for the Realtime (Keyboard) tracks.

Use the TRACK SELECT button to switch from the Realtime (Keyboard) tracks to the Style tracks, and vice-versa.

Mixer:FX Send

- - - - - - C:100 D:050 A:127 B:020 C:100 D:050

- - - - - - C:100 D:050 C:100 D:050

Mixer:FX Send

A:100 B:050 A:100 B:050

A:127 B:020 A:100 B:050

A:110 B:050 A:100 B:050

A:100 B:050 A:100 B:050

Mixer:Pan

L-64	C+00
R+10	C+00
C+00	L-10
C+00	C+00

Pan

L-64 Hard Left.

C+00 Center.

To select a parameter and edit its value:

1.Use the VOLUME/VALUE (A-H) buttons to select a track.

2.Use the F1-F4 buttons to select one of the effect proces- sors.

3.Use the TEMPO/VALUE controls to change the value.

Send level

000No effect. Only the direct (uneffected) signal goes to the outputs.

127100% effect. The direct (uneffected) and effected signals go to the outputs with the same level.