Korg KORG Pa50 user manual Track Mode, Track INTERNAL/EXTERNAL, Reset, TrackMode, TrackInt/Ext

46Style Play operating mode

Page 14 - Track: Mode

Percus1V	“Classic” percussion set volume.
Percus2V	“Ethnic” percussion set volume.
SFX V	Special effects volume.

Reset

You can reset the parameters’ value by keeping the SHIFT button pressed, while pressing one of the selected track VOL- UME/VALUE buttons. After you press the above button com- bination, the Reset window appears:

RESET NO=Cancel

YES=Trk SHFT+YES=All

Press ENTER/YES to reset the currently selected track. Keep SHIFT pressed, and press ENTER/YES, to reset all tracks. Press EXIT/NO to abort and keep all parameters unchanged.

PAGE 14 - TRACK: MODE

This page lets you set the polyphony mode for each track.

Track:Mode
- - - - -	Mono Right
Poly	Poly
- - - - - Poly
	Poly

Track:Mode
Drum	Mono Right
Drum	Poly
Poly	Poly
Poly	Poly

Parameters
Drum	This is a Drum/Percussion track. No Master or
	Octave Transpose applies to this track. You can
	set a different volume for each class of percus-
	sive instruments (see “Page 13 - Track: Easy
	edit” on page 45).
Poly	Tracks of this kind are polyphonic, i.e. they can
	play more than one note at the same time.
Mono	Tracks of this kind are monophonic, i.e. each
	new note stops the previous note.

Mono Right A Mono track, but with priority assigned to the rightmost (highest) note.

PAGE 15 - TRACK: INTERNAL/EXTERNAL

This page lets you set the Internal or External status for each track. It is very useful to let a Style track drive an external expander, or play a digital piano with one of Pa50’s Realtime tracks.

Track:Int/Ext
Both	Both
Both	Both
Both	External
	Both

Track:Int/Ext
External	Both
External	Both
Both	Both
Both	Both

Parameters
Internal	The track plays the sounds generated by the
	internal sound engine. It does not play an
	external instrument connected to the MIDI
	OUT.
External	The track plays an external instrument con-
	nected to the MIDI OUT. It does not play the
	internal sounds, therefore saving polyphony.
	When a track is set to “External”, a strings of
	transmitted Control Change and Program
	Change data is shown instead of the Program
	name assigned to the track. In the following
	example, CC#0 is the Control Change 0 (Bank
	Select MSB), CC#32 is the Control Change 32
	(Bank Select LSB), PC is the Program Change.
	121- 3- 0
	CC#0	CC#32	PC
Both	The track plays both the internal sounds and
	an external instrument connected to the MIDI
	OUT.