36MIDI

The Chord 1 and Chord 2 channels

split point into the Upper (above the split point) and Lower (below the split point) parts.

The notes that arrive to a Global channel are used for the chord recognition of the automatic accompaniment. If the KEYBOARD MODE is SPLIT, only the notes below the split point will be used. These notes will be combined with the ones of the special Chord 1 and Chord 2 channels.

THE CHORD 1 AND CHORD 2 CHANNELS

You can set two special Chord channels (see page 128) to send to the Pa50 notes for the chord recognition. The notes will be combined with the notes that go through the channel set as Global (Global notes are recognized only under the split point, if the SPLIT LED is lit up).

The Chord channels are not affected by the split point and the KEYBOARD MODE section of the control panel. All the notes – both above and below the split point – will be sent to the chord recognition.

The buttons of the CHORD SCANNING section have a par- ticular effect on the Chord channels:

if you have selected LOWER, the chord recognition mode will be set by the “Chord Recognition Mode” parameter in the Style Play mode (see page 50);

if you have selected UPPER or FULL, the chord recogni- tion mode will always be Fingered 2 (you need to play at least three notes in order for the chord to be detected).

These two channels are especially useful for accordion players to assign a different Chord channel to the chords and the bass played with the left hand. In this way, chords and bass will participate to the creation of chords for the chord recogni- tion of the automatic accompaniment.

THE CONTROL CHANNEL

You can set a MIDI IN channel as the Control channel (see page 127), to select Styles and Performance from an external device. See the Appendix for a list of messages corresponding to Pa50 internal data.

MIDI SETUP

You can play Pa50 with an external controller, and use it sim- ply as a gorgeous sound generator. To help you configure the MIDI channels, we have provided a set of MIDI Setups. Go to Global mode to select the one that fits your MIDI needs. (See “Page 4 - MIDI Setup” on page 126 for more information).

We recommend you to consider each MIDI Setup as a start- ing point you can freely tweak. Once you have selected the most appropriate MIDI Setup for the connection to be made, you can modify the parameters as necessary and save the Glo- bal in the memory with the Write function (see “The Write window” on page 125).

CONNECTING PA50 TO A MASTER KEYBOARD

You can control the Pa50 with a master keyboard or any other MIDI keyboard. You only need to connect the MIDI OUT connector of the master keyboard to the MIDI IN connector of the Pa50. The master keyboard will become the integrated keyboard of the Pa50 if it transmits over the same channel programmed as Global in the Pa50.

MIDI IN

MIDI OUT

If the master keyboard transmits over the Global channel of the Pa50, the split point and the status of the KEYBOARD MODE section in the control panel will affect the notes received from the master keyboard.

Connections and settings

To connect the master keyboard to the Pa50 follow this pro- cedure:

1.Connect the MIDI OUT connector of the master key- board to the MIDI IN connector of the Pa50.

2.Program the master keyboard to transmit over the Glo- bal channel of the Pa50 (see “Page 6 - MIDI IN Chan- nels” on page 127).

For information on the master keyboard programming, see the user’s manual of the master keyboard.

3.Press GLOBAL to enter the Global mode, then go to “Page 4 - MIDI Setup” (see page 126).

4.Select the Master Keyboard Setup.

Note: The settings can change when new data is loaded from disk. To protect the settings from loading, use the Global Protect function (see “Global Protect” on page 142).

5.Press WRITE, select Global, and press ENTER to save the Global. The “Are you sure?” message will appear. Press ENTER to confirm, or EXIT to abort.

6.Press one of the buttons in the MODE section to go to the desired operative mode.

Page 38
Image 38
Korg KORG Pa50 user manual Control Channel, Midi Setup, Connections and settings