Korg KORG Pa50 user manual Excit/Enhan

182Effects

Filter/Dynamic

When “LFO Waveform” is set to Random, the “LFO Step Freq” parameter uses a random LFO cycle.

Random Filter LFO

LFO Frequency

LFO Step Freq

LFO Step Freq

011: Excit/Enhan

(Stereo Exciter/Enhancer)

This effect is a combination of the Exciter, which adds a punch to the sound and the Enhancer, which adds spread and presence.

Step-Tri Random

b: LFO Phase [degree]

Offsetting the left and right phases alters how modula- tion is applied to the left and right channels, creating a swelling affect.

	LFO Phase
0	+90 +180 [degree]

Stereo In - Stereo Out

Left

LEQ	HEQ
	Exciter
EQ Trim	Delay

	Depth
EQ Trim	Delay
	Exciter
	Enhancer

Right

D-mod

Wet / Dry

Wet / Dry

–180 –90 0 [degree]

e: BPM, f: Step Base Note, f: Times

The width of an LFO step, or a cycle of random LFO, is obtained by multiplying the length of a note ( … ) (selected for “Step Base Note”, in relation to the tempo specified in “BPM,” or the MIDI Clock tempo if “BPM” is set to MIDI) by the number specified in the “Times” parameter.

j: Wet/Dry

The effect sound’s phase will be reversed when you set this parameter in the range of values from –Wet to –1:99.

	Exciter Blend				–100...+100
	Sets the intensity (depth) of the Exciter effect					☞ ,
a	Src			Off...Tempo
	Selects the modulation source of the Exciter intensity
	Amt			–100...+100
	Sets the modulation amount of the Exciter intensity
	Emphatic Point			0...70
	Sets the frequency to be emphasized					☞ ,
b	Src			Off...Tempo
	Selects the modulation source of the frequency to be emphasized
	Amt			–70...+70
	Sets the amount of modulation of the frequency to be emphasized
c	Enhancer Dly L (Enhancer Delay L) [msec]			0.0...50.0msec
	Sets the delay time for the Enhancer left channel						☞
d	Enhancer Dly R (Enhancer Delay R) [msec]		0.0...50.0msec
	Sets the delay time for the Enhancer right channel					☞
	Enhancer Depth		0...100
	Sets the determines to what degree the Enhancer effect is applied
e	Src			Off...Tempo
	Selects the modulation source of the Enhancer width
	Amt			–100...+100
	Sets the modulation amount of the Enhancer width
f	EQ Trim			0...100
	Sets the 2-band EQ input level
	Pre LEQ Gain [dB]			–15.0...+15.0dB
g	Table , “Sets the gain of Low EQ,” on page 176
	Pre HEQ Gain [dB]			–15.0...+15.0dB
	Table , “Sets the gain of High EQ,” on page 176
	Wet/Dry	Dry, 1:99...99:1, Wet
	Table , “Sets the balance between the effect and dry sounds,” on page 175
h	Src			Off...Tempo
	Table , “Selects the modulation source of the effect balance,” on page 175
	Amt				–100...+100
	Table , “Sets the modulation amount of the effect bal-
	ance,” on page 175

a: Exciter Blend

This parameter sets the depth (intensity) of the Exciter effect. Positive values give a frequency pattern (to be emphasized) different from negative values.

b: Emphatic Point

This parameter sets the frequency to be emphasized. Higher values will emphasize lower frequencies.

c: Enhancer Dly L [msec], d: Enhancer Dly R [msec]

These parameters set the delay time for the Enhancer left and right channel. Specifying a slightly different delay time for the left and right channel will add a stereo image, depth, and width to the sound.