11
3.
CHAPTER 1
5
6
7
8
-Take the Expansion Memory out of its carton.
-Check which type of Controller board is installed in your printer.
-Mount the expansion memory in the socket (SIMM3 or 4) at the location shown on the controller board.
SIMM3 SIMM4
Controller board (a)
SIMM3
SIMM4
Controller board (b)
-Insert the expansion memory pin into the socket.
-Push the expansion memory down in the direction of the arrow.
-Check that the expansion memory is mounted securely.
Left Side | Right Side |
9
10
11
-Secure the controller board in position with the four screws.
-Reconnect the interface cable or network cable.
-This completes the procedure to mount the expansion memory in the printer.
-You now change the setting for <Installed memory> that is one of the setup items of the printer driver on the host computer.
For details, see the Printer Driver
Operator's Manual separately provided (that is shipped together with the accessories that come with this printer set).