Minolta 0990-7701-02 user manual Transfer Roller Unit, Image Transfer Roller, Bearings

62

1. Changing Cartridges

Changing the Fusing Unit and Image Transfer Roller Unit

⋅The Image Transfer Roller Unit and Fusing Unit can provide up to about 100,000 A4/ letter-size prints. (This value will vary with the color-to-monochrome print ratio, image conditions, etc.)

⋅Change the Fusing Unit and Image Transfer Roller Unit at the same time.

⋅Put the old Fusing Unit and Image Transfer Roller Unit in polyethylene bags or the like and dispose of them according to your local regulations, or return them to your sales representative.

Maintaining Your Printer CHAPTER 4

1

2

3

-Grasp and pull down the Front Cover Lock Release Lever to swing open the Front Cover

Front Cover

Lock Release

Lever

-Lift the Image Transfer Roller Unit to the position shown.

Transfer

Roller Unit

- Pull out the Image Transfer Roller Unit.

4

5

6

-Take the new Image Transfer Roller Unit out of its carton.

NOTE

-Do not touch the surface of the Image Transfer Roller.

It may lead to reduced print quality.

Image Transfer Roller

-Insert both shafts of the Image Transfer Roller Unit into the bearings as shown.

Bearings