Minolta 0990-7701-02 user manual Paper Support, White Tape Face down, Face u

Loading OHP sheets / Labels

PRECAUTIONS

⋅ Labels must be loaded in the TRAY 1 (Multi Purpose Tray). Do not load them in the TRAY 2 (Second) / TRAY 3 (Third Cassette). ⋅ When handling OHP sheets, it is recommended to wear gloves so that they are not soiled with fingerprints and smears. Soiled OHP

sheets may lead to a defective printed image.

29

4.Loading the Printing Paper

⋅Do not use the following paper. To do so may lead to reduced print quality, a misfeed or a failure.

-Labels which are easy to peel.

-Labels which have already been peeled partially.

-Labels from which adhesive has come out.

We recommend testing any type of label before buying it in large amounts.

⋅OHP sheets or labels can be printed continuously but the feeding capability may be affected by the material used and the operating environment. If they cannot be fed successfully, it is recommended not to load several sheets at a time but to load them one by one.

⋅The Following transparencies are recommended;

-For color printing, Minolta CF-200 (D) or 3M CG3710

-For monochrome printing, Minolta M-100 (D) or 3M PP2500

To purchase Minolta transparencies please contact your local Minolta dealers, on call 1 (888) 2-MINOLTA. (for U.S.A. Users only)

Using the Printer InstallationCHAPTER 2

TRAY 1 (Multi Purpose Tray)

1 - Open the TRAY 1 (Multi Purpose Tray).

2	- Open the wrapper of the paper.
	Paper Face

3	- Adjust the Paper Guides to fit the size of the OHP
		or Label sheets.
	- To load a paper stack of long size, open the Paper
		Support.
	- Load the standard OHP or Label sheet stack on the tray
		facing up.
				Paper Support
		Face u	p

4

NOTE

-Load the recommended OHP (Minolta CF-200 (D). 3M CG3710, Minolta CF-100 (D) or 3M PP2500) so that the front side (on which the white tape is fitted) faces down in the tray.

White Tape

Face down

-Do not load more than 50 sheets on the tray.

-When OHP or Label sheets remain in the tray, do not load more sheets on the remaining sheets.

-If you load the OHP or Label sheets forcibly, it may cause a misfeed.

-When you want to replenish the OHP or Label sheets, take out the remaining sheets and stack them on the additional OHP or Label sheets.

Then fan the OHP or Label sheets and load them.

-We recommend replenishing the OHP or Label sheets only when the Tray is empty.