Minolta 0990-7701-02 Xxxxx Toner Removed, Drum Unit Removed, Waste Bottle Removed, Cover Open

77

2. A Problem Exists in the Preparation Stage and During a Print Cycle

LCD Message	Description	Action
REMOVED	The toner cartridge isn’t present.	Mount the Toner Cartridge. ☞p. 48
XXXXX TONER
REMOVED	The drum cartridge is missing.	Mount the Drum Cartridge. ☞p. 56
DRUM UNIT
REMOVED	The waste toner bottle is missing.	Mount the Waste Bottle. ☞p. 56
WASTE BOTTLE
REMOVED	The Oiling Roller or fusing unit is	Mount the Oiling Roller. ☞p. 56
OILING ROLLER	missing.
		Mount the Fusing Unit.☞p. 62
WARNING	The front cover or the rear cover of	Close the Front Cover.☞p. 18
COVER OPEN	the printer were not closed cor-
		Close the Rear Cover. ☞p. 18
	rectly.
			5
WARNING	A paper jam occurred near the	Remove the sheet of paper misfed.
			CHAPTER
WARNING	A paper jam occurred between the
PAPER JAM 1	paper take-up section.	For details, see “When a Paper Misfeed has
		Occurred.” ☞p. 80
PAPER JAM2	paper take-up section and the fus-
	ing section.		Troubleshooting
WARNING	A paper jam occurred between the
PAPER JAM3	fusing section and the paper exit
	section.
RESET TO SAVE	During the printing cycle, one or	If you want the current printing cycle to use the
	more printer settings were changed.	new setting, stop the printing cycle using the JOB
		& MEMORY function.
		When printing has stopped, initiate a new printing
		cycle. ☞pp. 36, 38, 40
		If you do not want the current printing cycle to
		use the new setting, press the Proceed key to
		resume the current printing cycle.
		The new setting will be used in the next printing
		cycle.
CONTEXT SAVE	The setting for PCL CONTEXT	Press the Proceed key. When “READY” appears
CHANGE	SAVING or PS CONTEXT SAV-	on the display, the new setting for CONTEXT
	ING has been changed.	SAVING has been entered. Please refer to MEM-
		ORY MENU in Chapter 3 for details.
		☞ p. 45.
MEMORY OVERFLOW	The printer has received more data	Press the Proceed key.
	than can be fit into its internal	The printer returns to the On-line state.
	memory.	Run the print cycle again.
BUFFER FULL	A buffer full error occurred .
DATA TOO COMPLEX	The data sent can’t be processed
	because it is too complex.