10
Installation CHAPTER 1
3.
Expansion Memory (Option) Setting-Up
PRECAUTION
-This printer is equipped with two sockets for the installation of expansion memory.
-The optional expansion memories come in five different capacities: 1 MB, 2 MB, 4 MB, 8MB, 16 MB, and 32 MB. The combination in which expansion memories of different capacities are plugged in allows the memory capacity of the printer to be expanded up to 68 MB (standard 4 MB + expansion 64 MB). Purchase the expansion memory according to your particular need.
CAUTION
-Before opening the optional packages or handling the options, briefly touch the metal part of the printer to remove any electrostatic charge from your body.
-When options are taken out of their conductive bags or off their mats, hold them by their edge to avoid touching the terminals or the patterned surfaces.
-When the Controller board is taken out of the printer, hold it by the edges to avoid touching the terminals or the patterned surfaces.
-After removing the options or Controller board, be sure to place it on an
1
2
-Turn the printer OFF.
Power Switch
-Disconnect the cable from the interface connector (Parallel or Serial) or network connector
3
4
-Remove the four screws that secure the controller board on the back of the printer.
-Slide out the controller board.
NOTE
-When the Controller board is taken out of the printer, hold it by the edges to avoid touching the terminals or the patterned surfaces.
-After removing the options or Controller board, be sure to place it on an