Minolta 0990-7701-02 user manual Front Cover Lock Release Lever, Toner, Cartridge

52

1. Changing Cartridges

Changing the Toner Cartridge

Maintaining Your Printer CHAPTER 4

Manual mode

-Grasp and pull down the Front Cover Lock Release

1 Lever to swing open the Front Cover

Front Cover Lock

Release Lever

2	- By turning the Toner Cartridge Rack dial clockwise,
	the Toner Cartridge Rack rotates in the same
	direction. (The dial cannot be turned in the opposite
	direction.)
	- The Toner Cartridges are fitted to the Rack in the order
	of Black, Yellow, Magenta and Cyan. Turn the Rack to
	the removal position for the Cartridge to be changed.
	- You will feel the Dial become heavy while turning it.
	This is the position for removing the Cartridge.

Toner Cartridge rack dial

Removal/ Insert- ing posi- tion

Toner Cartridge rack

Toner Car-

Toner Car-

tridge rack dial

tridge rack

Black			Cyan
Toner		CYN	Toner
Cartridge	BLK		Cartridge
	YEL	MAG
Yellow
			Magenta
Toner			Toner
Cartridge			Cartridge

3

4

5

-To confirm the Rack position for removing the Cartridge, use the position confirmation window beside the Dial. The removal position indicator appears in the window to show that the Rack is in position for the Cartridge.

OK NG

Removal position indicator: ALL GREEN

NOTE

-Before installing or removing the Toner Cartridge, always make sure that the Rack is located in the position for removing the Cartridge.

If the Rack is in another position, never install or remove the Toner Cartridge.

-Hold the handle of the used Toner Cartridge and pull it toward you.