TABLE OF CONTENTS
1. INTRODUCTION | 1 | ||
1.1 | Explanation of symbols | 1 | |
1.2 | System description | 1 | |
1.3 | Product specification | 2 | |
| Electrical specifications | 2 | |
| Operating environment | 2 | |
| Mechanical specification | 2 | |
1.4 | Switches and displays | 3 | |
1.5 | Safety |
| 4 |
1.6 | Communication port | 6 | |
1.7 | RS232 interface | 6 | |
2. INSTALLATION AND OPERATION | 6 | ||
2.1 | Unpacking and inspection | 6 | |
2.2 | Installation | 6 | |
2.3 | Wiring description | 7 | |
3. TROUBLESHOOTING | 10 | ||
APPLICATION NOTES | A1 | ||
1. START UP | A1 | ||
2. OUTPUT VOLTAGE SETTING | A2 | ||
3. DISPLAYS AND ALARMS | A2 | ||
| 1. | Load level and battery capacity | A2 |
| 2. | Alarm for inverter | A2 |
| 3. | Alarm for bus overvoltage | A2 |
| 4. | Alarm for | A3 |
| 5. | Display and alarm for overload | A3 |
| 6. | Alarm for BATTERY WEAK or BATTERY BAD | A3 |
| 7. | Alarm for abnormal input voltage | A4 |
| 8. | Battery | A4 |
| 9. | Bypass S.T.S short alarm | A4 |
| 10. Inverter S.T.S short alarm | A5 | |
4. LIMITED PRODUCT WARRANTY | A5 | ||
5. DECLARATION OF CONFORMITY | A6 | ||