Minuteman UPS MCP 10001, MCP 6001 Important Safety Instructions, Para Systems Life Support Policy

Page 6

1.5 Safety

IMPORTANT SAFETY INSTRUCTIONS

This manual contains important instructions for MCP SERIES series that SHOULD BE FOLLOWED DURING INSTALLATION AND MAINTENANCE of the UPS and the batteries. The sound pressure level at the operator’s position is equal to or less than 60dB(A).

IMPORTANT SAFETY INSTRUCTIONS

SAVE THESE INSTRUCTIONS!

WARNING: CHANGES OR MODIFICATIONS TO THIS UNIT NOT EXPRESSLY APPROVED BY THE PARTY RESPONSIBLE FOR COMPLIANCE COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT.

CAUTION: TO REDUCE THE RISK OF ELECTRICAL SHOCK IN CONDITIONS WHERE LOAD EQUIP- MENT GROUNDING CANNOT BE VERIFIED, DISCONNECT THE UPS FROM THE AC POWER OUTLET BEFORE INSTALLING A COMPUTER INTERFACE CABLE. RECONNECT THE POWER CORD ONLY AFTER ALL SIGNALING CONNECTIONS ARE MADE.

NOTICE: This equipment has been tested and found to comply with the limits for a Class A diigital device, persuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equip- ment generates, uses and can radiate radio frequency energy and, if not installed and used in accor- dance with the instruction manual, may cause interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at his own expense.

This digital apparatus does not exceed the Class A limits for radio noise emissions from digital apparatus set out in the Radio interference regulations of the Canadian Department of Communications.

Le présent appeil numérique n’emit pas de bruits radioélectroniques dépassant les limites applicables aus appareils numérique de las Class A prescrites dans le Rélement sur le brouillage radioélectronique édicte par le ministerédés Com- munications du Canada.

PARA SYSTEMS LIFE SUPPORT POLICY

As a general policy, Para Systems Inc. (Para Systems) does not recommend the use of any of its products in life support applications where failure or malfunction of the Para Systems product can be reasonably expected to cause failure of the life support device or to significantly affect its safety or effectiveness. Para Systems does not recommend the use of any of its products in direct patient care. Para Systems will not knowingly sell its products for use in such applications unless it receives in writing assurances satisfactory to Para Systems that (a) the risks of injury or damage have been minimized, (b) the customer assumes all such risks, and (c) the liability of Para Systems Inc. is adequately protected under the circumstances.

Examples of devices considered to be life support devices are neonatal oxygen analyzers, nerve stimulators (whether used for anesthesia, pain relief, or other purposes), autotransfusion devices, blood pumps, defibrillators, arrhythmia detectors and alarms, pacemakers, hemodialysis systems, peritoneal dialysis systems, neonatal ventilator incubators, ventilators for both adults and infants, anesthesia ventilators, and infusion pumps as well as any other devices designated as “critical” by the United States FDA.

Hospital grade wiring devices and leakage current may be ordered as options on many PARA SYSTEMS UPS systems. PARA SYSTEMS does not claim that units with this modification are certified or listed as Hospital Grade by PARA SYSTEMS or any other organization. Therefore, these units do not meet the requirements for use in direct patient care.

Page 4

Image 6
Contents Continuous Power Series User’s Manual MCP Table of Contents Explanation of Symbols IntroductionSystem Description Input Product Specifications Electrical SpecificationsMechanical Specifications OutputSwitches and Displays Important Safety Instructions Para Systems Life Support PolicyHazardous Voltage Communication Port Installation and OperationInstallation RS-232 IinterfaceWiring Description Rear ViewOutput Voltage Configurations Output Configuration #5 = 240VAC Obtaining Service TroubleshootingTroubleshooting Chart Minuteman UPSApplication Notes START-UP1 Inverter Mode 1 Bypass Mode Bypass Short Alarm Limited Product Warranty Declaration of Conformity Page 34000139 Rev