Minuteman UPS MCP 6001, MCP 10001 user manual Wiring Description, Rear View

Page 9

2.3 WIRING DESCRIPTION

The wiring method for the MCP SERIES is shown in Figure A.

Figure A - Wiring Diagram for MCP 6001, & MCP10001

REAR VIEW

Wiring Instructions:

1.Utility panel circuit breaker required is 35A or larger

2.Utility wire guage must be 8 guage or larger.

3.Connect utility per drawing.

4.Connect output load connections and jumper wires for correct voltages per drawings.

5.Use proper size AWG wires for all connections.

6KVA

O NLY

10KVA

O N L Y

NOTE: PARA SYSTEMS DOES NOT PROVIDE AC OUTPUT OVERCURRENT PROTEC- TION. OUTPUT OVERCURRENT PROTECTION IS TO BE PROVIDED BY THE USER.

Page 7

Image 9
Contents Continuous Power Series User’s Manual MCP Table of Contents Explanation of Symbols IntroductionSystem Description Mechanical Specifications Product Specifications Electrical SpecificationsInput OutputSwitches and Displays Para Systems Life Support Policy Important Safety InstructionsHazardous Voltage Installation Installation and OperationCommunication Port RS-232 IinterfaceRear View Wiring DescriptionOutput Voltage Configurations Output Configuration #5 = 240VAC Troubleshooting Chart TroubleshootingObtaining Service Minuteman UPSSTART-UP Application Notes1 Inverter Mode 1 Bypass Mode Bypass Short Alarm Limited Product Warranty Declaration of Conformity Page 34000139 Rev