24
Preparing Your Site
When preparing to install your Lightning system, attention should be given to Environmental, Power and Location requirements.
•Environmental Requirements
Lightning is designed to operate in normal “machine room” or “control room” conditions. Care must also be taken to avoid temperature and humidity extremes.
•Location and Power Requirements
The following table lists power requirements for the Lightning Chassis.
Lightning Chassis Power Requirements
Parameter | Specification |
System voltage (NTSC and PAL) . . . . . . 110/220V
Power consumption . . . . . . . . . . . . . . . . . <500 Watts
The following table lists power requirements for the Lightning ShotBox.
Note that power is supplied from a separate supply.
Lightning ShotBox Power Requirements
Parameter | Specification |
System voltage (NTSC and PAL) . . . . . . 110/220V
Power consumption . . . . . . . . . . . . . . . . . <50 Watts
When connecting Lightning, take care to avoid power lines that are subject to noise and voltage spikes. Do not install the system on a power circuit that is common to such equipment as air conditioners and refrigera- tion units. An AC noise filter and surge protector are recommended if unstable power conditions are present.