Pinnacle Speakers Lightning 1000 manual Input connection, Output Connection

27

Note

Input connection

To connect digital video inputs:

1.Connect CCIR-601 digital video sources to the A/Video Input connector on all standard and optional channels in your system.

2.Connect CCIR-601 digital key sources to the B/Key Input connec- tor on all standard and optional channels in your system.

Output Connection

To connect digital video outputs:

1.For all standard and optional channels in your system, connect the Video Output connector to the desired destination input (typically, a video monitor or a routing switcher).

2.For all standard and optional channels, connect the Key Output to the desired destination input (typically, a routing switcher).

The user can redefine channel assignments via software. In this condition, note that your system’s physical wiring and logical channel assignments may not match.

Control and Network Connection

To connect control and network connections:

1.Connect the supplied mouse to the Mouse connector.

2.Connect the supplied alphanumeric keyboard to the Keyboard connector.

3.Plug an RJ-45 connector (from a designated network transceiver) into the Network port, to connect Lightning to your facility’s PC network. The network card accepts both 10-baseT and 100-baseT connections. Refer to your Windows NT User’s Guide for details on configuring Lightning as a network node.

Lightning 1000 Installation Guide