Pinnacle Speakers Lightning 1000 manual Reference Connection

26

Note

Reference Connection

To connect video reference:

1.Connect a stable analog reference signal (such as Black Burst) from your house sync generator to the left-hand Reference connector.

The house sync generator must feed the same reference to all devices in your Lightning system.

2.If Lightning is the last device in your reference loop, terminate the right-hand Reference connector with a 75-ohm terminator as shown below.

Reference Out

Loop

Loop

75 Ohm Terminator

Sync Generator

VTR 1

VTR 2

Lightning

3.If Lightning is in the middle of your reference loop, connect the right- hand Reference connector to the next device’s reference input connector, as shown below

Reference Out

Loop

Loop

Loop to next device

Sync Generator

VTR 1

Lightning

VTR 2

Lightning 1000 Installation Guide